QPainter¶

Inheritance diagram of QPainter

Synopsis¶

Functions¶

def background ()
def backgroundMode ()
def begin (arg__1)
def beginNativePainting ()
def boundingRect (rect, flags, text)
def boundingRect (rect, flags, text)
def boundingRect (rect, text[, o=QTextOption()])
def boundingRect (x, y, w, h, flags, text)
def brush ()
def brushOrigin ()
def clipPath ()
def clipRegion ()
def combinedMatrix ()
def combinedTransform ()
def compositionMode ()
def device ()
def deviceMatrix ()
def deviceTransform ()
def drawArc (arg__1, a, alen)
def drawArc (rect, a, alen)
def drawArc (x, y, w, h, a, alen)
def drawChord (arg__1, a, alen)
def drawChord (rect, a, alen)
def drawChord (x, y, w, h, a, alen)
def drawConvexPolygon (arg__1)
def drawConvexPolygon (arg__1)
def drawConvexPolygon (polygon)
def drawConvexPolygon (polygon)
def drawEllipse (center, rx, ry)
def drawEllipse (center, rx, ry)
def drawEllipse (r)
def drawEllipse (r)
def drawEllipse (x, y, w, h)
def drawImage (p, image)
def drawImage (p, image)
def drawImage (p, image, sr[, flags=Qt.AutoColor])
def drawImage (p, image, sr[, flags=Qt.AutoColor])
def drawImage (r, image)
def drawImage (r, image)
def drawImage (targetRect, image, sourceRect[, flags=Qt.AutoColor])
def drawImage (targetRect, image, sourceRect[, flags=Qt.AutoColor])
def drawImage (x, y, image[, sx=0[, sy=0[, sw=-1[, sh=-1[, flags=Qt.AutoColor]]]]])
def drawLine (line)
def drawLine (line)
def drawLine (p1, p2)
def drawLine (p1, p2)
def drawLine (x1, y1, x2, y2)
def drawLines (lines)
def drawLines (lines)
def drawLines (pointPairs)
def drawLines (pointPairs)
def drawPath (path)
def drawPicture (p, picture)
def drawPicture (p, picture)
def drawPicture (x, y, picture)
def drawPie (arg__1, a, alen)
def drawPie (rect, a, alen)
def drawPie (x, y, w, h, a, alen)
def drawPixmap (p, pm)
def drawPixmap (p, pm)
def drawPixmap (p, pm, sr)
def drawPixmap (p, pm, sr)
def drawPixmap (r, pm)
def drawPixmap (targetRect, pixmap, sourceRect)
def drawPixmap (targetRect, pixmap, sourceRect)
def drawPixmap (x, y, pm)
def drawPixmap (x, y, pm, sx, sy, sw, sh)
def drawPixmap (x, y, w, h, pm)
def drawPixmap (x, y, w, h, pm, sx, sy, sw, sh)
def drawPoint (p)
def drawPoint (pt)
def drawPoint (x, y)
def drawPoints (arg__1)
def drawPoints (arg__1)
def drawPoints (points)
def drawPoints (points)
def drawPolygon (arg__1, arg__2)
def drawPolygon (arg__1, arg__2)
def drawPolygon (polygon[, fillRule=Qt.OddEvenFill])
def drawPolygon (polygon[, fillRule=Qt.OddEvenFill])
def drawPolyline (arg__1)
def drawPolyline (arg__1)
def drawPolyline (polygon)
def drawPolyline (polyline)
def drawRect (rect)
def drawRect (rect)
def drawRect (x1, y1, w, h)
def drawRects (rectangles)
def drawRects (rectangles)
def drawRoundRect (r[, xround=25[, yround=25]])
def drawRoundRect (r[, xround=25[, yround=25]])
def drawRoundRect (x, y, w, h[, xRound=25[, yRound=25]])
def drawRoundedRect (rect, xRadius, yRadius[, mode=Qt.AbsoluteSize])
def drawRoundedRect (rect, xRadius, yRadius[, mode=Qt.AbsoluteSize])
def drawRoundedRect (x, y, w, h, xRadius, yRadius[, mode=Qt.AbsoluteSize])
def drawText (p, s)
def drawText (p, s)
def drawText (r, flags, text)
def drawText (r, flags, text)
def drawText (r, text[, o=QTextOption()])
def drawText (x, y, s)
def drawText (x, y, w, h, flags, text)
def drawTextItem (p, ti)
def drawTextItem (p, ti)
def drawTextItem (x, y, ti)
def drawTiledPixmap (arg__1, arg__2[, pos=QPoint()])
def drawTiledPixmap (rect, pm[, offset=QPointF()])
def drawTiledPixmap (x, y, w, h, arg__5[, sx=0[, sy=0]])
def end ()
def endNativePainting ()
def eraseRect (arg__1)
def eraseRect (arg__1)
def eraseRect (x, y, w, h)
def fillPath (path, brush)
def fillRect (arg__1, arg__2)
def fillRect (arg__1, arg__2)
def fillRect (arg__1, color)
def fillRect (arg__1, color)
def fillRect (r, c)
def fillRect (r, c)
def fillRect (r, style)
def fillRect (r, style)
def fillRect (x, y, w, h, arg__5)
def fillRect (x, y, w, h, c)
def fillRect (x, y, w, h, color)
def fillRect (x, y, w, h, style)
def font ()
def fontInfo ()
def fontMetrics ()
def hasClipping ()
def initFrom (widget)
def isActive ()
def layoutDirection ()
def opacity ()
def paintEngine ()
def pen ()
def renderHints ()
def resetMatrix ()
def resetTransform ()
def restore ()
def rotate (a)
def save ()
def scale (sx, sy)
def setBackground (bg)
def setBackgroundMode (mode)
def setBrush (brush)
def setBrush (style)
def setBrushOrigin (arg__1)
def setBrushOrigin (arg__1)
def setBrushOrigin (x, y)
def setClipPath (path[, op=Qt.ReplaceClip])
def setClipRect (arg__1[, op=Qt.ReplaceClip])
def setClipRect (arg__1[, op=Qt.ReplaceClip])
def setClipRect (x, y, w, h[, op=Qt.ReplaceClip])
def setClipRegion (arg__1[, op=Qt.ReplaceClip])
def setClipping (enable)
def setCompositionMode (mode)
def setFont (f)
def setLayoutDirection (direction)
def setOpacity (opacity)
def setPen (color)
def setPen (pen)
def setPen (style)
def setRenderHint (hint[, on=true])
def setRenderHints (hints[, on=true])
def setTransform (transform[, combine=false])
def setViewTransformEnabled (enable)
def setViewport (viewport)
def setViewport (x, y, w, h)
def setWindow (window)
def setWindow (x, y, w, h)
def setWorldMatrix (matrix[, combine=false])
def setWorldMatrixEnabled (enabled)
def setWorldTransform (matrix[, combine=false])
def shear (sh, sv)
def strokePath (path, pen)
def testRenderHint (hint)
def transform ()
def translate (dx, dy)
def translate (offset)
def translate (offset)
def viewTransformEnabled ()
def viewport ()
def window ()
def worldMatrix ()
def worldMatrixEnabled ()
def worldTransform ()

Static functions¶

def restoreRedirected (device)
def setRedirected (device, replacement[, offset=QPoint()])

Detailed Description¶

The PySide.QtGui.QPainter class performs low-level painting on widgets and other paint devices.

PySide.QtGui.QPainter provides highly optimized functions to do most of the drawing GUI programs require. It can draw everything from simple lines to complex shapes like pies and chords. It can also draw aligned text and pixmaps. Normally, it draws in a “natural” coordinate system, but it can also do view and world transformation. PySide.QtGui.QPainter can operate on any object that inherits the PySide.QtGui.QPaintDevice class.

The common use of PySide.QtGui.QPainter is inside a widget’s paint event: Construct and customize (e.g. set the pen or the brush) the painter. Then draw. Remember to destroy the PySide.QtGui.QPainter object after drawing. For example:
def paintEvent(self, paintEvent):
    painter = QPainter(self)
    painter.setPen(Qt.blue)
    painter.setFont(QFont("Arial", 30))
    painter.drawText(rect(), Qt.AlignCenter, "Qt")
The core functionality of PySide.QtGui.QPainter is drawing, but the class also provide several functions that allows you to customize PySide.QtGui.QPainter ‘s settings and its rendering quality, and others that enable clipping. In addition you can control how different shapes are merged together by specifying the painter’s composition mode.

The PySide.QtGui.QPainter.isActive() function indicates whether the painter is active. A painter is activated by the PySide.QtGui.QPainter.begin() function and the constructor that takes a PySide.QtGui.QPaintDevice argument. The PySide.QtGui.QPainter.end() function, and the destructor, deactivates it.

Together with the PySide.QtGui.QPaintDevice and PySide.QtGui.QPaintEngine classes, PySide.QtGui.QPainter form the basis for Qt’s paint system. PySide.QtGui.QPainter is the class used to perform drawing operations. PySide.QtGui.QPaintDevice represents a device that can be painted on using a PySide.QtGui.QPainter . PySide.QtGui.QPaintEngine provides the interface that the painter uses to draw onto different types of devices. If the painter is active, PySide.QtGui.QPainter.device() returns the paint device on which the painter paints, and PySide.QtGui.QPainter.paintEngine() returns the paint engine that the painter is currently operating on. For more information, see the Paint System .

Sometimes it is desirable to make someone else paint on an unusual PySide.QtGui.QPaintDevice . PySide.QtGui.QPainter supports a static function to do this, PySide.QtGui.QPainter.setRedirected() .

Warning

When the paintdevice is a widget, PySide.QtGui.QPainter can only be used inside a paintEvent() function or in a function called by paintEvent(); that is unless the Qt.WA_PaintOutsidePaintEvent widget attribute is set. On Mac OS X and Windows, you can only paint in a paintEvent() function regardless of this attribute’s setting.

Settings¶

There are several settings that you can customize to make PySide.QtGui.QPainter draw according to your preferences:

PySide.QtGui.QPainter.font() is the font used for drawing text. If the painter PySide.QtGui.QPainter.isActive() , you can retrieve information about the currently set font, and its metrics, using the PySide.QtGui.QPainter.fontInfo() and PySide.QtGui.QPainter.fontMetrics() functions respectively.

PySide.QtGui.QPainter.brush() defines the color or pattern that is used for filling shapes.

PySide.QtGui.QPainter.pen() defines the color or stipple that is used for drawing lines or boundaries.

PySide.QtGui.QPainter.backgroundMode() defines whether there is a PySide.QtGui.QPainter.background() or not, i.e it is either Qt.OpaqueMode or Qt.TransparentMode .

PySide.QtGui.QPainter.background() only applies when PySide.QtGui.QPainter.backgroundMode() is Qt.OpaqueMode and PySide.QtGui.QPainter.pen() is a stipple. In that case, it describes the color of the background pixels in the stipple.

PySide.QtGui.QPainter.brushOrigin() defines the origin of the tiled brushes, normally the origin of widget’s background.

PySide.QtGui.QPainter.viewport() , PySide.QtGui.QPainter.window() , PySide.QtGui.QPainter.worldTransform() make up the painter’s coordinate transformation system. For more information, see the Coordinate Transformations section and the Coordinate System documentation.

PySide.QtGui.QPainter.hasClipping() tells whether the painter clips at all. (The paint device clips, too.) If the painter clips, it clips to PySide.QtGui.QPainter.clipRegion() .

PySide.QtGui.QPainter.layoutDirection() defines the layout direction used by the painter when drawing text.

PySide.QtGui.QPainter.worldMatrixEnabled() tells whether world transformation is enabled.

PySide.QtGui.QPainter.viewTransformEnabled() tells whether view transformation is enabled.

Note that some of these settings mirror settings in some paint devices, e.g. QWidget.font() . The QPainter.begin() function (or equivalently the PySide.QtGui.QPainter constructor) copies these attributes from the paint device.

You can at any time save the PySide.QtGui.QPainter ‘s state by calling the PySide.QtGui.QPainter.save() function which saves all the available settings on an internal stack. The PySide.QtGui.QPainter.restore() function pops them back.

Drawing¶

PySide.QtGui.QPainter provides functions to draw most primitives: PySide.QtGui.QPainter.drawPoint() , PySide.QtGui.QPainter.drawPoints() , PySide.QtGui.QPainter.drawLine() , PySide.QtGui.QPainter.drawRect() , PySide.QtGui.QPainter.drawRoundedRect() , PySide.QtGui.QPainter.drawEllipse() , PySide.QtGui.QPainter.drawArc() , PySide.QtGui.QPainter.drawPie() , PySide.QtGui.QPainter.drawChord() , PySide.QtGui.QPainter.drawPolyline() , PySide.QtGui.QPainter.drawPolygon() , PySide.QtGui.QPainter.drawConvexPolygon() and drawCubicBezier() . The two convenience functions, PySide.QtGui.QPainter.drawRects() and PySide.QtGui.QPainter.drawLines() , draw the given number of rectangles or lines in the given array of QRects or QLines using the current pen and brush.

The PySide.QtGui.QPainter class also provides the PySide.QtGui.QPainter.fillRect() function which fills the given PySide.QtCore.QRect , with the given PySide.QtGui.QBrush , and the PySide.QtGui.QPainter.eraseRect() function that erases the area inside the given rectangle.

All of these functions have both integer and floating point versions.

Basic Drawing Example

The Basic Drawing example shows how to display basic graphics primitives in a variety of styles using the PySide.QtGui.QPainter class.

If you need to draw a complex shape, especially if you need to do so repeatedly, consider creating a PySide.QtGui.QPainterPath and drawing it using PySide.QtGui.QPainter.drawPath() .

Painter Paths example

The PySide.QtGui.QPainterPath class provides a container for painting operations, enabling graphical shapes to be constructed and reused.

The Painter Paths example shows how painter paths can be used to build complex shapes for rendering.

PySide.QtGui.QPainter also provides the PySide.QtGui.QPainter.fillPath() function which fills the given PySide.QtGui.QPainterPath with the given PySide.QtGui.QBrush , and the PySide.QtGui.QPainter.strokePath() function that draws the outline of the given path (i.e. strokes the path).

See also the Vector Deformation demo which shows how to use advanced vector techniques to draw text using a PySide.QtGui.QPainterPath , the Gradients demo which shows the different types of gradients that are available in Qt, and the Path Stroking demo which shows Qt’s built-in dash patterns and shows how custom patterns can be used to extend the range of available patterns.

Vector Deformation Gradients Path Stroking

There are functions to draw pixmaps/images, namely PySide.QtGui.QPainter.drawPixmap() , PySide.QtGui.QPainter.drawImage() and PySide.QtGui.QPainter.drawTiledPixmap() . Both PySide.QtGui.QPainter.drawPixmap() and PySide.QtGui.QPainter.drawImage() produce the same result, except that PySide.QtGui.QPainter.drawPixmap() is faster on-screen while PySide.QtGui.QPainter.drawImage() may be faster on a PySide.QtGui.QPrinter or other devices.

Text drawing is done using PySide.QtGui.QPainter.drawText() . When you need fine-grained positioning, PySide.QtGui.QPainter.boundingRect() tells you where a given PySide.QtGui.QPainter.drawText() command will draw.

There is a PySide.QtGui.QPainter.drawPicture() function that draws the contents of an entire PySide.QtGui.QPicture . The PySide.QtGui.QPainter.drawPicture() function is the only function that disregards all the painter’s settings as PySide.QtGui.QPicture has its own settings.

Rendering Quality¶

To get the optimal rendering result using PySide.QtGui.QPainter , you should use the platform independent PySide.QtGui.QImage as paint device; i.e. using PySide.QtGui.QImage will ensure that the result has an identical pixel representation on any platform.

The PySide.QtGui.QPainter class also provides a means of controlling the rendering quality through its QPainter.RenderHint enum and the support for floating point precision: All the functions for drawing primitives has a floating point version. These are often used in combination with the QPainter.Antialiasing render hint.

Concentric Circles Example

The Concentric Circles example shows the improved rendering quality that can be obtained using floating point precision and anti-aliasing when drawing custom widgets.

The application’s main window displays several widgets which are drawn using the various combinations of precision and anti-aliasing.

The QPainter.RenderHint enum specifies flags to PySide.QtGui.QPainter that may or may not be respected by any given engine. QPainter.Antialiasing indicates that the engine should antialias edges of primitives if possible, QPainter.TextAntialiasing indicates that the engine should antialias text if possible, and the QPainter.SmoothPixmapTransform indicates that the engine should use a smooth pixmap transformation algorithm. HighQualityAntialiasing is an OpenGL-specific rendering hint indicating that the engine should use fragment programs and offscreen rendering for antialiasing.

The PySide.QtGui.QPainter.renderHints() function returns a flag that specifies the rendering hints that are set for this painter. Use the PySide.QtGui.QPainter.setRenderHint() function to set or clear the currently set RenderHints .

Coordinate Transformations¶

Normally, the PySide.QtGui.QPainter operates on the device’s own coordinate system (usually pixels), but PySide.QtGui.QPainter has good support for coordinate transformations.

nop PySide.QtGui.QPainter.rotate() PySide.QtGui.QPainter.scale() PySide.QtGui.QPainter.translate()

The most commonly used transformations are scaling, rotation, translation and shearing. Use the PySide.QtGui.QPainter.scale() function to scale the coordinate system by a given offset, the PySide.QtGui.QPainter.rotate() function to rotate it clockwise and PySide.QtGui.QPainter.translate() to translate it (i.e. adding a given offset to the points). You can also twist the coordinate system around the origin using the PySide.QtGui.QPainter.shear() function. See the Affine Transformations demo for a visualization of a sheared coordinate system.

See also the Transformations example which shows how transformations influence the way that PySide.QtGui.QPainter renders graphics primitives. In particular it shows how the order of transformations affects the result.

Affine Transformations Demo

The Affine Transformations demo show Qt’s ability to perform affine transformations on painting operations. The demo also allows the user to experiment with the transformation operations and see the results immediately.

All the tranformation operations operate on the transformation PySide.QtGui.QPainter.worldTransform() . A matrix transforms a point in the plane to another point. For more information about the transformation matrix, see the Coordinate System and PySide.QtGui.QTransform documentation.

The PySide.QtGui.QPainter.setWorldTransform() function can replace or add to the currently set PySide.QtGui.QPainter.worldTransform() . The PySide.QtGui.QPainter.resetTransform() function resets any transformations that were made using PySide.QtGui.QPainter.translate() , PySide.QtGui.QPainter.scale() , PySide.QtGui.QPainter.shear() , PySide.QtGui.QPainter.rotate() , PySide.QtGui.QPainter.setWorldTransform() , PySide.QtGui.QPainter.setViewport() and PySide.QtGui.QPainter.setWindow() functions. The PySide.QtGui.QPainter.deviceTransform() returns the matrix that transforms from logical coordinates to device coordinates of the platform dependent paint device. The latter function is only needed when using platform painting commands on the platform dependent handle, and the platform does not do transformations nativly.

When drawing with PySide.QtGui.QPainter , we specify points using logical coordinates which then are converted into the physical coordinates of the paint device. The mapping of the logical coordinates to the physical coordinates are handled by PySide.QtGui.QPainter ‘s PySide.QtGui.QPainter.combinedTransform() , a combination of PySide.QtGui.QPainter.viewport() and PySide.QtGui.QPainter.window() and PySide.QtGui.QPainter.worldTransform() . The PySide.QtGui.QPainter.viewport() represents the physical coordinates specifying an arbitrary rectangle, the PySide.QtGui.QPainter.window() describes the same rectangle in logical coordinates, and the PySide.QtGui.QPainter.worldTransform() is identical with the transformation matrix.

See also Coordinate System

Clipping¶

PySide.QtGui.QPainter can clip any drawing operation to a rectangle, a region, or a vector path. The current clip is available using the functions PySide.QtGui.QPainter.clipRegion() and PySide.QtGui.QPainter.clipPath() . Whether paths or regions are preferred (faster) depends on the underlying PySide.QtGui.QPainter.paintEngine() . For example, the PySide.QtGui.QImage paint engine prefers paths while the X11 paint engine prefers regions. Setting a clip is done in the painters logical coordinates.

After PySide.QtGui.QPainter ‘s clipping, the paint device may also clip. For example, most widgets clip away the pixels used by child widgets, and most printers clip away an area near the edges of the paper. This additional clipping is not reflected by the return value of PySide.QtGui.QPainter.clipRegion() or PySide.QtGui.QPainter.hasClipping() .

Composition Modes¶

PySide.QtGui.QPainter provides the QPainter.CompositionMode enum which defines the Porter-Duff rules for digital image compositing; it describes a model for combining the pixels in one image, the source, with the pixels in another image, the destination.

The two most common forms of composition are Source and SourceOver . Source is used to draw opaque objects onto a paint device. In this mode, each pixel in the source replaces the corresponding pixel in the destination. In SourceOver composition mode, the source object is transparent and is drawn on top of the destination.

Note that composition transformation operates pixelwise. For that reason, there is a difference between using the graphic primitive itself and its bounding rectangle: The bounding rect contains pixels with alpha == 0 (i.e the pixels surrounding the primitive). These pixels will overwrite the other image’s pixels, affectively clearing those, while the primitive only overwrites its own area.

Composition Modes Demo

The Composition Modes demo, available in Qt’s demo directory, allows you to experiment with the various composition modes and see the results immediately.

Limitations¶

If you are using coordinates with Qt’s raster-based paint engine, it is important to note that, while coordinates greater than +/- 2 ¹⁵ can be used, any painting performed with coordinates outside this range is not guaranteed to be shown; the drawing may be clipped. This is due to the use of short int in the implementation.

The outlines generated by Qt’s stroker are only an approximation when dealing with curved shapes. It is in most cases impossible to represent the outline of a bezier curve segment using another bezier curve segment, and so Qt approximates the curve outlines by using several smaller curves. For performance reasons there is a limit to how many curves Qt uses for these outlines, and thus when using large pen widths or scales the outline error increases. To generate outlines with smaller errors it is possible to use the PySide.QtGui.QPainterPathStroker class, which has the setCurveThreshold member function which let’s the user specify the error tolerance. Another workaround is to convert the paths to polygons first and then draw the polygons instead.

Performance¶

PySide.QtGui.QPainter is a rich framework that allows developers to do a great variety of graphical operations, such as gradients, composition modes and vector graphics. And PySide.QtGui.QPainter can do this across a variety of different hardware and software stacks. Naturally the underlying combination of hardware and software has some implications for performance, and ensuring that every single operation is fast in combination with all the various combinations of composition modes, brushes, clipping, transformation, etc, is close to an impossible task because of the number of permutations. As a compromise we have selected a subset of the PySide.QtGui.QPainter API and backends, where performance is guaranteed to be as good as we can sensibly get it for the given combination of hardware and software.

The backends we focus on as high-performance engines are:

Raster - This backend implements all rendering in pure software and is always used to render into QImages. For optimal performance only use the format types QImage.Format_ARGB32_Premultiplied , QImage.Format_RGB32 or QImage.Format_RGB16 . Any other format, including QImage.Format_ARGB32 , has significantly worse performance. This engine is also used by default on Windows and on QWS. It can be used as default graphics system on any OS/hardware/software combination by passing -graphicssystem raster on the command line

OpenGL 2.0 (ES) - This backend is the primary backend for hardware accelerated graphics. It can be run on desktop machines and embedded devices supporting the OpenGL 2.0 or OpenGL/ES 2.0 specification. This includes most graphics chips produced in the last couple of years. The engine can be enabled by using PySide.QtGui.QPainter onto a PySide.QtOpenGL.QGLWidget or by passing -graphicssystem opengl on the command line when the underlying system supports it.

OpenVG - This backend implements the Khronos standard for 2D and Vector Graphics. It is primarily for embedded devices with hardware support for OpenVG. The engine can be enabled by passing -graphicssystem openvg on the command line when the underlying system supports it.

These operations are:

Simple transformations, meaning translation and scaling, pluss 0, 90, 180, 270 degree rotations.

drawPixmap() in combination with simple transformations and opacity with non-smooth transformation mode (QPainter::SmoothPixmapTransform not enabled as a render hint).

Rectangle fills with solid color, two-color linear gradients and simple transforms.

Rectangular clipping with simple transformations and intersect clip.

Composition Modes QPainter::CompositionMode_Source and QPainter.CompositionMode_SourceOver

Rounded rectangle filling using solid color and two-color linear gradients fills.

3x3 patched pixmaps, via qDrawBorderPixmap.

This list gives an indication of which features to safely use in an application where performance is critical. For certain setups, other operations may be fast too, but before making extensive use of them, it is recommended to benchmark and verify them on the system where the software will run in the end. There are also cases where expensive operations are ok to use, for instance when the result is cached in a PySide.QtGui.QPixmap .

See also

PySide.QtGui.QPaintDevice PySide.QtGui.QPaintEngine QtSvg Module Basic Drawing Example Drawing Utility Functions

class PySide.QtGui.QPainter¶

class PySide.QtGui.QPainter(arg__1)

Parameters:	arg__1 – `PySide.QtGui.QPaintDevice`

Constructs a painter.

Constructs a painter that begins painting the paint device immediately.

This constructor is convenient for short-lived painters, e.g. in a QWidget.paintEvent() and should be used only once. The constructor calls PySide.QtGui.QPainter.begin() for you and the PySide.QtGui.QPainter destructor automatically calls PySide.QtGui.QPainter.end() .

Here’s an example using PySide.QtGui.QPainter.begin() and PySide.QtGui.QPainter.end() :

def paintEvent(self, paintEvent):
    p = QPainter()
    p.begin(self)
    p.drawLine(...)         # drawing code
    p.end()

The same example using this constructor:

self paintEvent(self, paintEvent):
    p = QPainter(self)
    p.drawLine(...)         # drawing code

Since the constructor cannot provide feedback when the initialization of the painter failed you should rather use PySide.QtGui.QPainter.begin() and PySide.QtGui.QPainter.end() to paint on external devices, e.g. printers.

PySide.QtGui.QPainter.CompositionMode¶

Defines the modes supported for digital image compositing. Composition modes are used to specify how the pixels in one image, the source, are merged with the pixel in another image, the destination.

Please note that the bitwise raster operation modes, denoted with a RasterOp prefix, are only natively supported in the X11 and raster paint engines. This means that the only way to utilize these modes on the Mac is via a PySide.QtGui.QImage . The RasterOp denoted blend modes are not supported for pens and brushes with alpha components. Also, turning on the QPainter.Antialiasing render hint will effectively disable the RasterOp modes.

../../_images/qpainter-compositionmode1.png

../../_images/qpainter-compositionmode2.png

The most common type is SourceOver (often referred to as just alpha blending) where the source pixel is blended on top of the destination pixel in such a way that the alpha component of the source defines the translucency of the pixel.

When the paint device is a PySide.QtGui.QImage , the image format must be set to Format_ARGB32Premultiplied or Format_ARGB32 for the composition modes to have any effect. For performance the premultiplied version is the preferred format.

When a composition mode is set it applies to all painting operator, pens, brushes, gradients and pixmap/image drawing.

Constant	Description
QPainter.CompositionMode_SourceOver	This is the default mode. The alpha of the source is used to blend the pixel on top of the destination.
QPainter.CompositionMode_DestinationOver	The alpha of the destination is used to blend it on top of the source pixels. This mode is the inverse of `CompositionMode_SourceOver` .
QPainter.CompositionMode_Clear	The pixels in the destination are cleared (set to fully transparent) independent of the source.
QPainter.CompositionMode_Source	The output is the source pixel. (This means a basic copy operation and is identical to SourceOver when the source pixel is opaque).
QPainter.CompositionMode_Destination	The output is the destination pixel. This means that the blending has no effect. This mode is the inverse of `CompositionMode_Source` .
QPainter.CompositionMode_SourceIn	The output is the source, where the alpha is reduced by that of the destination.
QPainter.CompositionMode_DestinationIn	The output is the destination, where the alpha is reduced by that of the source. This mode is the inverse of `CompositionMode_SourceIn` .
QPainter.CompositionMode_SourceOut	The output is the source, where the alpha is reduced by the inverse of destination.
QPainter.CompositionMode_DestinationOut	The output is the destination, where the alpha is reduced by the inverse of the source. This mode is the inverse of `CompositionMode_SourceOut` .
QPainter.CompositionMode_SourceAtop	The source pixel is blended on top of the destination, with the alpha of the source pixel reduced by the alpha of the destination pixel.
QPainter.CompositionMode_DestinationAtop	The destination pixel is blended on top of the source, with the alpha of the destination pixel is reduced by the alpha of the destination pixel. This mode is the inverse of `CompositionMode_SourceAtop` .
QPainter.CompositionMode_Xor	The source, whose alpha is reduced with the inverse of the destination alpha, is merged with the destination, whose alpha is reduced by the inverse of the source alpha. `CompositionMode_Xor` is not the same as the bitwise Xor.
QPainter.CompositionMode_Plus	Both the alpha and color of the source and destination pixels are added together.
QPainter.CompositionMode_Multiply	The output is the source color multiplied by the destination. Multiplying a color with white leaves the color unchanged, while multiplying a color with black produces black.
QPainter.CompositionMode_Screen	The source and destination colors are inverted and then multiplied. Screening a color with white produces white, whereas screening a color with black leaves the color unchanged.
QPainter.CompositionMode_Overlay	Multiplies or screens the colors depending on the destination color. The destination color is mixed with the source color to reflect the lightness or darkness of the destination.
QPainter.CompositionMode_Darken	The darker of the source and destination colors is selected.
QPainter.CompositionMode_Lighten	The lighter of the source and destination colors is selected.
QPainter.CompositionMode_ColorDodge	The destination color is brightened to reflect the source color. A black source color leaves the destination color unchanged.
QPainter.CompositionMode_ColorBurn	The destination color is darkened to reflect the source color. A white source color leaves the destination color unchanged.
QPainter.CompositionMode_HardLight	Multiplies or screens the colors depending on the source color. A light source color will lighten the destination color, whereas a dark source color will darken the destination color.
QPainter.CompositionMode_SoftLight	Darkens or lightens the colors depending on the source color. Similar to `CompositionMode_HardLight` .
QPainter.CompositionMode_Difference	Subtracts the darker of the colors from the lighter. Painting with white inverts the destination color, whereas painting with black leaves the destination color unchanged.
QPainter.CompositionMode_Exclusion	Similar to `CompositionMode_Difference` , but with a lower contrast. Painting with white inverts the destination color, whereas painting with black leaves the destination color unchanged.
QPainter.RasterOp_SourceOrDestination	Does a bitwise OR operation on the source and destination pixels (src OR dst).
QPainter.RasterOp_SourceAndDestination	Does a bitwise AND operation on the source and destination pixels (src AND dst).
QPainter.RasterOp_SourceXorDestination	Does a bitwise XOR operation on the source and destination pixels (src XOR dst).
QPainter.RasterOp_NotSourceAndNotDestination	Does a bitwise NOR operation on the source and destination pixels ((NOT src) AND (NOT dst)).
QPainter.RasterOp_NotSourceOrNotDestination	Does a bitwise NAND operation on the source and destination pixels ((NOT src) OR (NOT dst)).
QPainter.RasterOp_NotSourceXorDestination	Does a bitwise operation where the source pixels are inverted and then XOR’ed with the destination ((NOT src) XOR dst).
QPainter.RasterOp_NotSource	Does a bitwise operation where the source pixels are inverted (NOT src).
QPainter.RasterOp_NotSourceAndDestination	Does a bitwise operation where the source is inverted and then AND’ed with the destination ((NOT src) AND dst).
QPainter.RasterOp_SourceAndNotDestination	Does a bitwise operation where the source is AND’ed with the inverted destination pixels (src AND (NOT dst)).

See also

PySide.QtGui.QPainter.compositionMode() PySide.QtGui.QPainter.setCompositionMode() Composition Modes Image Composition Example

PySide.QtGui.QPainter.RenderHint¶

Renderhints are used to specify flags to PySide.QtGui.QPainter that may or may not be respected by any given engine.

Constant	Description
QPainter.Antialiasing	Indicates that the engine should antialias edges of primitives if possible.
QPainter.TextAntialiasing	Indicates that the engine should antialias text if possible. To forcibly disable antialiasing for text, do not use this hint. Instead, set `QFont.NoAntialias` on your font’s style strategy.
QPainter.SmoothPixmapTransform	Indicates that the engine should use a smooth pixmap transformation algorithm (such as bilinear) rather than nearest neighbor.
QPainter.HighQualityAntialiasing	An OpenGL-specific rendering hint indicating that the engine should use fragment programs and offscreen rendering for antialiasing.
QPainter.NonCosmeticDefaultPen	The engine should interpret pens with a width of 0 (which otherwise enables `QPen.isCosmetic()` ) as being a non-cosmetic pen with a width of 1.

See also

PySide.QtGui.QPainter.renderHints() PySide.QtGui.QPainter.setRenderHint() Rendering Quality Concentric Circles Example

PySide.QtGui.QPainter.PixmapFragmentHint¶

Constant	Description
QPainter.OpaqueHint	Indicates that the pixmap fragments to be drawn are opaque. Opaque fragments are potentially faster to draw.

See also

QPainter.drawPixmapFragments() QPainter.PixmapFragment

Note

This enum was introduced or modified in Qt 4.7

PySide.QtGui.QPainter.background()¶

Return type:	`PySide.QtGui.QBrush`

Returns the current background brush.

PySide.QtGui.QPainter.backgroundMode()¶

Return type:	`PySide.QtCore.Qt.BGMode`

Returns the current background mode.

PySide.QtGui.QPainter.begin(arg__1)¶

Parameters:	arg__1 – `PySide.QtGui.QPaintDevice`
Return type:	`PySide.QtCore.bool`

Begins painting the paint device and returns true if successful; otherwise returns false.

Notice that all painter settings ( PySide.QtGui.QPainter.setPen() , PySide.QtGui.QPainter.setBrush() etc.) are reset to default values when PySide.QtGui.QPainter.begin() is called.

The errors that can occur are serious problems, such as these:

painter.begin(0)  # impossible - paint device cannot be 0

image = QPixmap(0, 0)
painter.begin(&image) # impossible - image.isNull() == true

painter.begin(myWidget)
painter2.begin(myWidget) # impossible - only one painter at a time

Note that most of the time, you can use one of the constructors instead of PySide.QtGui.QPainter.begin() , and that PySide.QtGui.QPainter.end() is automatically done at destruction.

Warning

A paint device can only be painted by one painter at a time.

Warning

Painting on a PySide.QtGui.QImage with the format QImage.Format_Indexed8 is not supported.

See also

PySide.QtGui.QPainter.end() PySide.QtGui.QPainter.QPainter()

PySide.QtGui.QPainter.beginNativePainting()¶

Flushes the painting pipeline and prepares for the user issuing commands directly to the underlying graphics context. Must be followed by a call to PySide.QtGui.QPainter.endNativePainting() .

Note that only the states the underlying paint engine changes will be reset to their respective default states. The states we reset may change from release to release. The following states are currently reset in the OpenGL 2 engine:

blending is disabled
the depth, stencil and scissor tests are disabled
the active texture unit is reset to 0
the depth mask, depth function and the clear depth are reset to their default values
the stencil mask, stencil operation and stencil function are reset to their default values
the current color is reset to solid white

If, for example, the OpenGL polygon mode is changed by the user inside a beginNativePaint()/ PySide.QtGui.QPainter.endNativePainting() block, it will not be reset to the default state by PySide.QtGui.QPainter.endNativePainting() . Here is an example that shows intermixing of painter commands and raw OpenGL commands:

painter = QPainter(self)
painter.fillRect(0, 0, 128, 128, Qt.green)
painter.beginNativePainting()

glEnable(GL_SCISSOR_TEST)
glScissor(0, 0, 64, 64)

glClearColor(1, 0, 0, 1)
glClear(GL_COLOR_BUFFER_BIT)

glDisable(GL_SCISSOR_TEST)

painter.endNativePainting()

PySide.QtGui.QPainter.boundingRect(x, y, w, h, flags, text)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` flags – `PySide.QtCore.int` text – unicode
Return type:	`PySide.QtCore.QRect`

This is an overloaded function.

Returns the bounding rectangle of the given text as it will appear when drawn inside the rectangle beginning at the point (x , y ) with width w and height h .

PySide.QtGui.QPainter.boundingRect(rect, flags, text)

Parameters:	rect – `PySide.QtCore.QRectF` flags – `PySide.QtCore.int` text – unicode
Return type:	`PySide.QtCore.QRectF`

Returns the bounding rectangle of the text as it will appear when drawn inside the given rectangle with the specified flags using the currently set PySide.QtGui.QPainter.font() ; i.e the function tells you where the PySide.QtGui.QPainter.drawText() function will draw when given the same arguments.

If the text does not fit within the given rectangle using the specified flags , the function returns the required rectangle.

The flags argument is a bitwise OR of the following flags:

Qt.AlignLeft
Qt.AlignRight
Qt.AlignHCenter
Qt.AlignTop
Qt.AlignBottom
Qt.AlignVCenter
Qt.AlignCenter
Qt.TextSingleLine
Qt.TextExpandTabs
Qt.TextShowMnemonic
Qt.TextWordWrap
Qt.TextIncludeTrailingSpaces

If several of the horizontal or several of the vertical alignment flags are set, the resulting alignment is undefined.

See also

PySide.QtGui.QPainter.drawText() Qt.Alignment Qt.TextFlag

PySide.QtGui.QPainter.boundingRect(rect, flags, text)

Parameters:	rect – `PySide.QtCore.QRect` flags – `PySide.QtCore.int` text – unicode
Return type:	`PySide.QtCore.QRect`

This is an overloaded function.

Returns the bounding rectangle of the text as it will appear when drawn inside the given rectangle with the specified flags using the currently set PySide.QtGui.QPainter.font() .

PySide.QtGui.QPainter.boundingRect(rect, text[, o=QTextOption()])

Parameters:	rect – `PySide.QtCore.QRectF` text – unicode o – `PySide.QtGui.QTextOption`
Return type:	`PySide.QtCore.QRectF`

This is an overloaded function.

Instead of specifying flags as a bitwise OR of the Qt.AlignmentFlag and Qt.TextFlag , this overloaded function takes an option argument. The PySide.QtGui.QTextOption class provides a description of general rich text properties.

See also

PySide.QtGui.QTextOption

PySide.QtGui.QPainter.brush()¶

Return type:	`PySide.QtGui.QBrush`

Returns the painter’s current brush.

See also

QPainter.setBrush() Settings

PySide.QtGui.QPainter.brushOrigin()¶

Return type:	`PySide.QtCore.QPoint`

Returns the currently set brush origin.

PySide.QtGui.QPainter.clipPath()¶

Return type:	`PySide.QtGui.QPainterPath`

Returns the currently clip as a path. Note that the clip path is given in logical coordinates.

Warning

PySide.QtGui.QPainter does not store the combined clip explicitly as this is handled by the underlying PySide.QtGui.QPaintEngine , so the path is recreated on demand and transformed to the current logical coordinate system. This is potentially an expensive operation.

PySide.QtGui.QPainter.clipRegion()¶

Return type:	`PySide.QtGui.QRegion`

Returns the currently set clip region. Note that the clip region is given in logical coordinates.

Warning

PySide.QtGui.QPainter does not store the combined clip explicitly as this is handled by the underlying PySide.QtGui.QPaintEngine , so the path is recreated on demand and transformed to the current logical coordinate system. This is potentially an expensive operation.

PySide.QtGui.QPainter.combinedMatrix()¶

Return type:	`PySide.QtGui.QMatrix`

Returns the transformation matrix combining the current window/viewport and world transformation.

It is advisable to use PySide.QtGui.QPainter.combinedTransform() instead of this function to preserve the properties of perspective transformations.

PySide.QtGui.QPainter.combinedTransform()¶

Return type:	`PySide.QtGui.QTransform`

Returns the transformation matrix combining the current window/viewport and world transformation.

PySide.QtGui.QPainter.compositionMode()¶

Return type:	`PySide.QtGui.QPainter.CompositionMode`

Returns the current composition mode.

See also

QPainter.CompositionMode PySide.QtGui.QPainter.setCompositionMode()

PySide.QtGui.QPainter.device()¶

Return type:	`PySide.QtGui.QPaintDevice`

Returns the paint device on which this painter is currently painting, or 0 if the painter is not active.

See also

PySide.QtGui.QPainter.isActive()

PySide.QtGui.QPainter.deviceMatrix()¶

Return type:	`PySide.QtGui.QMatrix`

Returns the matrix that transforms from logical coordinates to device coordinates of the platform dependent paint device.

Note

It is advisable to use PySide.QtGui.QPainter.deviceTransform() instead of this function to preserve the properties of perspective transformations.

This function is only needed when using platform painting commands on the platform dependent handle ( Qt.HANDLE ), and the platform does not do transformations nativly.

The QPaintEngine.PaintEngineFeature enum can be queried to determine whether the platform performs the transformations or not.

PySide.QtGui.QPainter.deviceTransform()¶

Return type:	`PySide.QtGui.QTransform`

Returns the matrix that transforms from logical coordinates to device coordinates of the platform dependent paint device.

This function is only needed when using platform painting commands on the platform dependent handle ( Qt.HANDLE ), and the platform does not do transformations nativly.

The QPaintEngine.PaintEngineFeature enum can be queried to determine whether the platform performs the transformations or not.

PySide.QtGui.QPainter.drawArc(rect, a, alen)¶

Parameters:	rect – `PySide.QtCore.QRectF` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

Draws the arc defined by the given rectangle , startAngle and spanAngle .

The startAngle and spanAngle must be specified in 1/16th of a degree, i.e. a full circle equals 5760 (16 * 360). Positive values for the angles mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o’clock position.

rectangle = QRectF(10.0, 20.0, 80.0, 60.0)
startAngle = 30 * 16
spanAngle = 120 * 16

painter = QPainter(self)
painter.drawArc(rectangle, startAngle, spanAngle)

PySide.QtGui.QPainter.drawArc(x, y, w, h, a, alen)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

This is an overloaded function.

Draws the arc defined by the rectangle beginning at (x , y ) with the specified width and height , and the given startAngle and spanAngle .

PySide.QtGui.QPainter.drawArc(arg__1, a, alen)

Parameters:	arg__1 – `PySide.QtCore.QRect` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

This is an overloaded function.

Draws the arc defined by the given rectangle , startAngle and spanAngle .

PySide.QtGui.QPainter.drawChord(rect, a, alen)¶

Parameters:	rect – `PySide.QtCore.QRectF` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

Draws the chord defined by the given rectangle , startAngle and spanAngle . The chord is filled with the current PySide.QtGui.QPainter.brush() .

The startAngle and spanAngle must be specified in 1/16th of a degree, i.e. a full circle equals 5760 (16 * 360). Positive values for the angles mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o’clock position.

rectangle = QRectF(10.0, 20.0, 80.0, 60.0)
startAngle = 30 * 16
spanAngle = 120 * 16

painter = QPainter(self)
painter.drawChord(rect, startAngle, spanAngle)

PySide.QtGui.QPainter.drawChord(x, y, w, h, a, alen)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

This is an overloaded function.

Draws the chord defined by the rectangle beginning at (x , y ) with the specified width and height , and the given startAngle and spanAngle .

PySide.QtGui.QPainter.drawChord(arg__1, a, alen)

Parameters:	arg__1 – `PySide.QtCore.QRect` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

This is an overloaded function.

Draws the chord defined by the given rectangle , startAngle and spanAngle .

PySide.QtGui.QPainter.drawConvexPolygon(polygon)¶

Parameters:	polygon – `PySide.QtGui.QPolygon`

This is an overloaded function.

Draws the convex polygon defined by polygon using the current pen and brush.

PySide.QtGui.QPainter.drawConvexPolygon(polygon)

Parameters:	polygon – `PySide.QtGui.QPolygonF`

This is an overloaded function.

Draws the convex polygon defined by polygon using the current pen and brush.

PySide.QtGui.QPainter.drawConvexPolygon(arg__1)

Parameters:	arg__1 –

PySide.QtGui.QPainter.drawConvexPolygon(arg__1)

Parameters:	arg__1 –

PySide.QtGui.QPainter.drawEllipse(x, y, w, h)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int`

This is an overloaded function.

Draws the ellipse defined by the rectangle beginning at (x , y ) with the given width and height .

PySide.QtGui.QPainter.drawEllipse(r)

Parameters:	r – `PySide.QtCore.QRect`

This is an overloaded function.

Draws the ellipse defined by the given rectangle .

PySide.QtGui.QPainter.drawEllipse(r)

Parameters:	r – `PySide.QtCore.QRectF`

Draws the ellipse defined by the given rectangle .

A filled ellipse has a size of rectangle . PySide.QtCore.QRect.size() . A stroked ellipse has a size of rectangle . PySide.QtCore.QRect.size() plus the pen width.

rectangle = QRectF(10.0, 20.0, 80.0, 60.0)

painter = QPainter(self)
painter.drawEllipse(rectangle)

See also

PySide.QtGui.QPainter.drawPie() Coordinate System

PySide.QtGui.QPainter.drawEllipse(center, rx, ry)

Parameters:	center – `PySide.QtCore.QPointF` rx – `PySide.QtCore.qreal` ry – `PySide.QtCore.qreal`

This is an overloaded function.

Draws the ellipse positioned at center with radii rx and ry .

PySide.QtGui.QPainter.drawEllipse(center, rx, ry)

Parameters:	center – `PySide.QtCore.QPoint` rx – `PySide.QtCore.int` ry – `PySide.QtCore.int`

This is an overloaded function.

Draws the ellipse positioned at center with radii rx and ry .

PySide.QtGui.QPainter.drawImage(r, image)¶

Parameters:	r – `PySide.QtCore.QRectF` image – `PySide.QtGui.QImage`

This is an overloaded function.

Draws the given image into the given rectangle .

Note

The image is scaled to fit the rectangle, if both the image and rectangle size disagree.

PySide.QtGui.QPainter.drawImage(targetRect, image, sourceRect[, flags=Qt.AutoColor])

Parameters:	targetRect – `PySide.QtCore.QRectF` image – `PySide.QtGui.QImage` sourceRect – `PySide.QtCore.QRectF` flags – `PySide.QtCore.Qt.ImageConversionFlags`

PySide.QtGui.QPainter.drawImage(x, y, image[, sx=0[, sy=0[, sw=-1[, sh=-1[, flags=Qt.AutoColor]]]]])

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` image – `PySide.QtGui.QImage` sx – `PySide.QtCore.int` sy – `PySide.QtCore.int` sw – `PySide.QtCore.int` sh – `PySide.QtCore.int` flags – `PySide.QtCore.Qt.ImageConversionFlags`

PySide.QtGui.QPainter.drawImage(r, image)

Parameters:	r – `PySide.QtCore.QRect` image – `PySide.QtGui.QImage`

This is an overloaded function.

Draws the given image into the given rectangle .

Note

The image is scaled to fit the rectangle, if both the image and rectangle size disagree.

PySide.QtGui.QPainter.drawImage(targetRect, image, sourceRect[, flags=Qt.AutoColor])

Parameters:	targetRect – `PySide.QtCore.QRect` image – `PySide.QtGui.QImage` sourceRect – `PySide.QtCore.QRect` flags – `PySide.QtCore.Qt.ImageConversionFlags`

PySide.QtGui.QPainter.drawImage(p, image, sr[, flags=Qt.AutoColor])

Parameters:	p – `PySide.QtCore.QPoint` image – `PySide.QtGui.QImage` sr – `PySide.QtCore.QRect` flags – `PySide.QtCore.Qt.ImageConversionFlags`

PySide.QtGui.QPainter.drawImage(p, image)

Parameters:	p – `PySide.QtCore.QPoint` image – `PySide.QtGui.QImage`

This is an overloaded function.

Draws the given image at the given point .

PySide.QtGui.QPainter.drawImage(p, image)

Parameters:	p – `PySide.QtCore.QPointF` image – `PySide.QtGui.QImage`

This is an overloaded function.

Draws the given image at the given point .

PySide.QtGui.QPainter.drawImage(p, image, sr[, flags=Qt.AutoColor])

Parameters:	p – `PySide.QtCore.QPointF` image – `PySide.QtGui.QImage` sr – `PySide.QtCore.QRectF` flags – `PySide.QtCore.Qt.ImageConversionFlags`

PySide.QtGui.QPainter.drawLine(x1, y1, x2, y2)¶

Parameters:	x1 – `PySide.QtCore.int` y1 – `PySide.QtCore.int` x2 – `PySide.QtCore.int` y2 – `PySide.QtCore.int`

This is an overloaded function.

Draws a line from (x1 , y1 ) to (x2 , y2 ) and sets the current pen position to (x2 , y2 ).

PySide.QtGui.QPainter.drawLine(p1, p2)

Parameters:	p1 – `PySide.QtCore.QPointF` p2 – `PySide.QtCore.QPointF`

This is an overloaded function.

Draws a line from p1 to p2 .

PySide.QtGui.QPainter.drawLine(p1, p2)

Parameters:	p1 – `PySide.QtCore.QPoint` p2 – `PySide.QtCore.QPoint`

This is an overloaded function.

Draws a line from p1 to p2 .

PySide.QtGui.QPainter.drawLine(line)

Parameters:	line – `PySide.QtCore.QLineF`

Draws a line defined by line .

line = QLineF(10.0, 80.0, 90.0, 20.0)

painter = QPainter(self)
painter.drawLine(line)

PySide.QtGui.QPainter.drawLine(line)

Parameters:	line – `PySide.QtCore.QLine`

This is an overloaded function.

Draws a line defined by line .

PySide.QtGui.QPainter.drawLines(lines)¶

Parameters:	lines –

PySide.QtGui.QPainter.drawLines(pointPairs)

Parameters:	pointPairs –

PySide.QtGui.QPainter.drawLines(pointPairs)

Parameters:	pointPairs –

PySide.QtGui.QPainter.drawLines(lines)

Parameters:	lines –

PySide.QtGui.QPainter.drawPath(path)¶

Parameters:	path – `PySide.QtGui.QPainterPath`

Draws the given painter path using the current pen for outline and the current brush for filling.

path = QPainterPath()
path.moveTo(20, 80)
path.lineTo(20, 30)
path.cubicTo(80, 0, 50, 50, 80, 80)

painter = QPainter(self)
painter.drawPath(path)

See also

the Painter Paths example the Vector Deformation demo

PySide.QtGui.QPainter.drawPicture(x, y, picture)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` picture – `PySide.QtGui.QPicture`

This is an overloaded function.

Draws the given picture at point (x , y ).

PySide.QtGui.QPainter.drawPicture(p, picture)

Parameters:	p – `PySide.QtCore.QPointF` picture – `PySide.QtGui.QPicture`

Replays the given picture at the given point .

The PySide.QtGui.QPicture class is a paint device that records and replays PySide.QtGui.QPainter commands. A picture serializes the painter commands to an IO device in a platform-independent format. Everything that can be painted on a widget or pixmap can also be stored in a picture.

This function does exactly the same as QPicture.play() when called with point = PySide.QtCore.QPoint (0, 0).

picture = QPicture()
point = QPointF(10.0, 20.0)
picture.load("drawing.pic")

painter = QPainter(self)
painter.drawPicture(0, 0, picture)

See also

QPicture.play()

PySide.QtGui.QPainter.drawPicture(p, picture)

Parameters:	p – `PySide.QtCore.QPoint` picture – `PySide.QtGui.QPicture`

This is an overloaded function.

Replays the given picture at the given point .

PySide.QtGui.QPainter.drawPie(x, y, w, h, a, alen)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

This is an overloaded function.

Draws the pie defined by the rectangle beginning at (x , y ) with the specified width and height , and the given startAngle and spanAngle .

PySide.QtGui.QPainter.drawPie(rect, a, alen)

Parameters:	rect – `PySide.QtCore.QRectF` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

Draws a pie defined by the given rectangle , startAngle and and spanAngle .

The pie is filled with the current PySide.QtGui.QPainter.brush() .

The startAngle and spanAngle must be specified in 1/16th of a degree, i.e. a full circle equals 5760 (16 * 360). Positive values for the angles mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o’clock position.

rectangle = QRectF(10.0, 20.0, 80.0, 60.0)
startAngle = 30 * 16
spanAngle = 120 * 16

painter = QPainter(self)
painter.drawPie(rectangle, startAngle, spanAngle)

PySide.QtGui.QPainter.drawPie(arg__1, a, alen)

Parameters:	arg__1 – `PySide.QtCore.QRect` a – `PySide.QtCore.int` alen – `PySide.QtCore.int`

This is an overloaded function.

Draws a pie defined by the given rectangle , startAngle and and spanAngle .

PySide.QtGui.QPainter.drawPixmap(x, y, pm)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` pm – `PySide.QtGui.QPixmap`

This is an overloaded function.

Draws the given pixmap at position (x , y ).

PySide.QtGui.QPainter.drawPixmap(targetRect, pixmap, sourceRect)

Parameters:	targetRect – `PySide.QtCore.QRectF` pixmap – `PySide.QtGui.QPixmap` sourceRect – `PySide.QtCore.QRectF`

Draws the rectangular portion source of the given pixmap into the given target in the paint device.

Note

The pixmap is scaled to fit the rectangle, if both the pixmap and rectangle size disagree.

target = QRectF(10.0, 20.0, 80.0, 60.0)
source = QRectF(0.0, 0.0, 70.0, 40.0)
pixmap = QPixmap(":myPixmap.png")

painter = QPainter(self)
painter.drawPixmap(target, image, source)

If pixmap is a PySide.QtGui.QBitmap it is drawn with the bits that are “set” using the pens color. If backgroundMode is Qt.OpaqueMode , the “unset” bits are drawn using the color of the background brush; if backgroundMode is Qt.TransparentMode , the “unset” bits are transparent. Drawing bitmaps with gradient or texture colors is not supported.

See also

PySide.QtGui.QPainter.drawImage()

PySide.QtGui.QPainter.drawPixmap(x, y, pm, sx, sy, sw, sh)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` pm – `PySide.QtGui.QPixmap` sx – `PySide.QtCore.int` sy – `PySide.QtCore.int` sw – `PySide.QtCore.int` sh – `PySide.QtCore.int`

This is an overloaded function.

Draws a pixmap at (x , y ) by copying a part of the given pixmap into the paint device.

(x , y ) specifies the top-left point in the paint device that is to be drawn onto. (sx , sy ) specifies the top-left point in pixmap that is to be drawn. The default is (0, 0).

(sw , sh ) specifies the size of the pixmap that is to be drawn. The default, (0, 0) (and negative) means all the way to the bottom-right of the pixmap.

PySide.QtGui.QPainter.drawPixmap(x, y, w, h, pm, sx, sy, sw, sh)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` pm – `PySide.QtGui.QPixmap` sx – `PySide.QtCore.int` sy – `PySide.QtCore.int` sw – `PySide.QtCore.int` sh – `PySide.QtCore.int`

This is an overloaded function.

Draws the rectangular portion with the origin (sx , sy ), width sw and height sh , of the given pixmap , at the point (x , y ), with a width of w and a height of h . If sw or sh are equal to zero the width/height of the pixmap is used and adjusted by the offset sx/sy;

PySide.QtGui.QPainter.drawPixmap(x, y, w, h, pm)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` pm – `PySide.QtGui.QPixmap`

This is an overloaded function.

Draws the pixmap into the rectangle at position (x , y ) with the given width and height .

PySide.QtGui.QPainter.drawPixmap(r, pm)

Parameters:	r – `PySide.QtCore.QRect` pm – `PySide.QtGui.QPixmap`

This is an overloaded function.

Draws the given pixmap into the given rectangle .

Note

The pixmap is scaled to fit the rectangle, if both the pixmap and rectangle size disagree.

PySide.QtGui.QPainter.drawPixmap(p, pm)

Parameters:	p – `PySide.QtCore.QPoint` pm – `PySide.QtGui.QPixmap`

This is an overloaded function.

Draws the given pixmap with its origin at the given point .

PySide.QtGui.QPainter.drawPixmap(p, pm)

Parameters:	p – `PySide.QtCore.QPointF` pm – `PySide.QtGui.QPixmap`

This is an overloaded function.

Draws the given pixmap with its origin at the given point .

PySide.QtGui.QPainter.drawPixmap(p, pm, sr)

Parameters:	p – `PySide.QtCore.QPoint` pm – `PySide.QtGui.QPixmap` sr – `PySide.QtCore.QRect`

This is an overloaded function.

Draws the rectangular portion source of the given pixmap with its origin at the given point .

PySide.QtGui.QPainter.drawPixmap(p, pm, sr)

Parameters:	p – `PySide.QtCore.QPointF` pm – `PySide.QtGui.QPixmap` sr – `PySide.QtCore.QRectF`

This is an overloaded function.

Draws the rectangular portion source of the given pixmap with its origin at the given point .

PySide.QtGui.QPainter.drawPixmap(targetRect, pixmap, sourceRect)

Parameters:	targetRect – `PySide.QtCore.QRect` pixmap – `PySide.QtGui.QPixmap` sourceRect – `PySide.QtCore.QRect`

This is an overloaded function.

Draws the rectangular portion source of the given pixmap into the given target in the paint device.

Note

The pixmap is scaled to fit the rectangle, if both the pixmap and rectangle size disagree.

PySide.QtGui.QPainter.drawPoint(x, y)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int`

This is an overloaded function.

Draws a single point at position (x , y ).

PySide.QtGui.QPainter.drawPoint(p)

Parameters:	p – `PySide.QtCore.QPoint`

This is an overloaded function.

Draws a single point at the given position using the current pen’s color.

PySide.QtGui.QPainter.drawPoint(pt)

Parameters:	pt – `PySide.QtCore.QPointF`

Draws a single point at the given position using the current pen’s color.

See also

Coordinate System

PySide.QtGui.QPainter.drawPoints(points)¶

Parameters:	points – `PySide.QtGui.QPolygon`

This is an overloaded function.

Draws the points in the vector points .

PySide.QtGui.QPainter.drawPoints(points)

Parameters:	points – `PySide.QtGui.QPolygonF`

This is an overloaded function.

Draws the points in the vector points .

PySide.QtGui.QPainter.drawPoints(arg__1)

Parameters:	arg__1 –

PySide.QtGui.QPainter.drawPoints(arg__1)

Parameters:	arg__1 –

PySide.QtGui.QPainter.drawPolygon(polygon[, fillRule=Qt.OddEvenFill])¶

Parameters:	polygon – `PySide.QtGui.QPolygonF` fillRule – `PySide.QtCore.Qt.FillRule`

PySide.QtGui.QPainter.drawPolygon(polygon[, fillRule=Qt.OddEvenFill])

Parameters:	polygon – `PySide.QtGui.QPolygon` fillRule – `PySide.QtCore.Qt.FillRule`

PySide.QtGui.QPainter.drawPolygon(arg__1, arg__2)

Parameters:	arg__1 – arg__2 – `PySide.QtCore.Qt.FillRule`

PySide.QtGui.QPainter.drawPolygon(arg__1, arg__2)

Parameters:	arg__1 – arg__2 – `PySide.QtCore.Qt.FillRule`

PySide.QtGui.QPainter.drawPolyline(polyline)¶

Parameters:	polyline – `PySide.QtGui.QPolygonF`

This is an overloaded function.

Draws the polyline defined by the given points using the current pen.

PySide.QtGui.QPainter.drawPolyline(polygon)

Parameters:	polygon – `PySide.QtGui.QPolygon`

This is an overloaded function.

Draws the polyline defined by the given points using the current pen.

PySide.QtGui.QPainter.drawPolyline(arg__1)

Parameters:	arg__1 –

PySide.QtGui.QPainter.drawPolyline(arg__1)

Parameters:	arg__1 –

PySide.QtGui.QPainter.drawRect(rect)¶

Parameters:	rect – `PySide.QtCore.QRectF`

Draws the current rectangle with the current pen and brush.

A filled rectangle has a size of rectangle . size() . A stroked rectangle has a size of rectangle . size() plus the pen width.

rectangle = QRectF(10.0, 20.0, 80.0, 60.0)

painter = QPainter(self)
painter.drawRect(rectangle)

PySide.QtGui.QPainter.drawRect(x1, y1, w, h)

Parameters:	x1 – `PySide.QtCore.int` y1 – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int`

This is an overloaded function.

Draws a rectangle with upper left corner at (x , y ) and with the given width and height .

PySide.QtGui.QPainter.drawRect(rect)

Parameters:	rect – `PySide.QtCore.QRect`

This is an overloaded function.

Draws the current rectangle with the current pen and brush.

PySide.QtGui.QPainter.drawRects(rectangles)¶

Parameters:	rectangles –

PySide.QtGui.QPainter.drawRects(rectangles)

Parameters:	rectangles –

PySide.QtGui.QPainter.drawRoundRect(x, y, w, h[, xRound=25[, yRound=25]])¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` xRound – `PySide.QtCore.int` yRound – `PySide.QtCore.int`

This is an overloaded function.

Draws the rectangle x , y , w , h with rounded corners.

PySide.QtGui.QPainter.drawRoundRect(r[, xround=25[, yround=25]])

Parameters:	r – `PySide.QtCore.QRect` xround – `PySide.QtCore.int` yround – `PySide.QtCore.int`

This is an overloaded function.

Draws the rectangle r with rounded corners.

PySide.QtGui.QPainter.drawRoundRect(r[, xround=25[, yround=25]])

Parameters:	r – `PySide.QtCore.QRectF` xround – `PySide.QtCore.int` yround – `PySide.QtCore.int`

Draws a rectangle r with rounded corners.

The xRnd and yRnd arguments specify how rounded the corners should be. 0 is angled corners, 99 is maximum roundedness.

A filled rectangle has a size of r. size() . A stroked rectangle has a size of r. size() plus the pen width.

PySide.QtGui.QPainter.drawRoundedRect(rect, xRadius, yRadius[, mode=Qt.AbsoluteSize])¶

Parameters:	rect – `PySide.QtCore.QRectF` xRadius – `PySide.QtCore.qreal` yRadius – `PySide.QtCore.qreal` mode – `PySide.QtCore.Qt.SizeMode`

PySide.QtGui.QPainter.drawRoundedRect(x, y, w, h, xRadius, yRadius[, mode=Qt.AbsoluteSize])

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` xRadius – `PySide.QtCore.qreal` yRadius – `PySide.QtCore.qreal` mode – `PySide.QtCore.Qt.SizeMode`

PySide.QtGui.QPainter.drawRoundedRect(rect, xRadius, yRadius[, mode=Qt.AbsoluteSize])

Parameters:	rect – `PySide.QtCore.QRect` xRadius – `PySide.QtCore.qreal` yRadius – `PySide.QtCore.qreal` mode – `PySide.QtCore.Qt.SizeMode`

PySide.QtGui.QPainter.drawText(r, flags, text)¶

Parameters:	r – `PySide.QtCore.QRectF` flags – `PySide.QtCore.int` text – unicode

This is an overloaded function.

Draws the given text within the provided rectangle .

painter = QPainter(self)
painter.drawText(rect, Qt.AlignCenter, tr("Qt by\nTrolltech"))

The boundingRect (if not null) is set to the what the bounding rectangle should be in order to enclose the whole text. The flags argument is a bitwise OR of the following flags:

Qt.AlignLeft
Qt.AlignRight
Qt.AlignHCenter
Qt.AlignJustify
Qt.AlignTop
Qt.AlignBottom
Qt.AlignVCenter
Qt.AlignCenter
Qt.TextDontClip
Qt.TextSingleLine
Qt.TextExpandTabs
Qt.TextShowMnemonic
Qt.TextWordWrap
Qt.TextIncludeTrailingSpaces

By default, PySide.QtGui.QPainter draws text anti-aliased.

Note

The y-coordinate of rectangle is used as the top of the font.

See also

Qt.AlignmentFlag Qt.TextFlag PySide.QtGui.QPainter.boundingRect() PySide.QtGui.QPainter.layoutDirection()

PySide.QtGui.QPainter.drawText(x, y, s)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` s – unicode

This is an overloaded function.

Draws the given text at position (x , y ), using the painter’s currently defined text direction.

By default, PySide.QtGui.QPainter draws text anti-aliased.

Note

The y-position is used as the baseline of the font.

PySide.QtGui.QPainter.drawText(x, y, w, h, flags, text)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` flags – `PySide.QtCore.int` text – unicode

This is an overloaded function.

Draws the given text within the rectangle with origin (x , y ), width and height .

The boundingRect (if not null) is set to the actual bounding rectangle of the output. The flags argument is a bitwise OR of the following flags:

Qt.AlignLeft
Qt.AlignRight
Qt.AlignHCenter
Qt.AlignJustify
Qt.AlignTop
Qt.AlignBottom
Qt.AlignVCenter
Qt.AlignCenter
Qt.TextSingleLine
Qt.TextExpandTabs
Qt.TextShowMnemonic
Qt.TextWordWrap

By default, PySide.QtGui.QPainter draws text anti-aliased.

Note

The y-position is used as the top of the font.

See also

Qt.AlignmentFlag Qt.TextFlag

PySide.QtGui.QPainter.drawText(r, text[, o=QTextOption()])

Parameters:	r – `PySide.QtCore.QRectF` text – unicode o – `PySide.QtGui.QTextOption`

This is an overloaded function.

Draws the given text in the rectangle specified using the option to control its positioning and orientation.

By default, PySide.QtGui.QPainter draws text anti-aliased.

Note

The y-coordinate of rectangle is used as the top of the font.

PySide.QtGui.QPainter.drawText(p, s)

Parameters:	p – `PySide.QtCore.QPoint` s – unicode

This is an overloaded function.

Draws the given text with the currently defined text direction, beginning at the given position .

By default, PySide.QtGui.QPainter draws text anti-aliased.

Note

The y-position is used as the baseline of the font.

PySide.QtGui.QPainter.drawText(p, s)

Parameters:	p – `PySide.QtCore.QPointF` s – unicode

Draws the given text with the currently defined text direction, beginning at the given position .

This function does not handle the newline character (n), as it cannot break text into multiple lines, and it cannot display the newline character. Use the QPainter.drawText() overload that takes a rectangle instead if you want to draw multiple lines of text with the newline character, or if you want the text to be wrapped.

By default, PySide.QtGui.QPainter draws text anti-aliased.

Note

The y-position is used as the baseline of the font.

PySide.QtGui.QPainter.drawText(r, flags, text)

Parameters:	r – `PySide.QtCore.QRect` flags – `PySide.QtCore.int` text – unicode

This is an overloaded function.

Draws the given text within the provided rectangle according to the specified flags . The boundingRect (if not null) is set to the what the bounding rectangle should be in order to enclose the whole text.

By default, PySide.QtGui.QPainter draws text anti-aliased.

Note

The y-coordinate of rectangle is used as the top of the font.

PySide.QtGui.QPainter.drawTextItem(x, y, ti)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` ti – `PySide.QtGui.QTextItem`

This is an overloaded function.

PySide.QtGui.QPainter.drawTextItem(p, ti)

Parameters:	p – `PySide.QtCore.QPoint` ti – `PySide.QtGui.QTextItem`

This is an overloaded function.

Draws the text item ti at position p .

PySide.QtGui.QPainter.drawTextItem(p, ti)

Parameters:	p – `PySide.QtCore.QPointF` ti – `PySide.QtGui.QTextItem`

Draws the text item ti at position p .

This method ignores the painters background mode and color. drawText and qt_format_text have to do it themselves, as only they know the extents of the complete string.

It ignores the font set on the painter as the text item has one of its own.

The underline and strikeout parameters of the text items font are ignored aswell. You’ll need to pass in the correct flags to get underlining and strikeout.

PySide.QtGui.QPainter.drawTiledPixmap(x, y, w, h, arg__5[, sx=0[, sy=0]])¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` arg__5 – `PySide.QtGui.QPixmap` sx – `PySide.QtCore.int` sy – `PySide.QtCore.int`

This is an overloaded function.

Draws a tiled pixmap in the specified rectangle.

(x , y ) specifies the top-left point in the paint device that is to be drawn onto; with the given width and height . (sx , sy ) specifies the top-left point in the pixmap that is to be drawn; this defaults to (0, 0).

PySide.QtGui.QPainter.drawTiledPixmap(arg__1, arg__2[, pos=QPoint()])

Parameters:	arg__1 – `PySide.QtCore.QRect` arg__2 – `PySide.QtGui.QPixmap` pos – `PySide.QtCore.QPoint`

This is an overloaded function.

Draws a tiled pixmap , inside the given rectangle with its origin at the given position .

PySide.QtGui.QPainter.drawTiledPixmap(rect, pm[, offset=QPointF()])

Parameters:	rect – `PySide.QtCore.QRectF` pm – `PySide.QtGui.QPixmap` offset – `PySide.QtCore.QPointF`

Draws a tiled pixmap , inside the given rectangle with its origin at the given position .

Calling PySide.QtGui.QPainter.drawTiledPixmap() is similar to calling PySide.QtGui.QPainter.drawPixmap() several times to fill (tile) an area with a pixmap, but is potentially much more efficient depending on the underlying window system.

See also

PySide.QtGui.QPainter.drawPixmap()

PySide.QtGui.QPainter.end()¶

Return type:	`PySide.QtCore.bool`

Ends painting. Any resources used while painting are released. You don’t normally need to call this since it is called by the destructor.

Returns true if the painter is no longer active; otherwise returns false.

PySide.QtGui.QPainter.endNativePainting()¶: Restores the painter after manually issuing native painting commands. Lets the painter restore any native state that it relies on before calling any other painter commands.

See also

PySide.QtGui.QPainter.beginNativePainting()

PySide.QtGui.QPainter.eraseRect(arg__1)¶

Parameters:	arg__1 – `PySide.QtCore.QRectF`

Erases the area inside the given rectangle . Equivalent to calling

fillRect(rectangle, background())

See also

PySide.QtGui.QPainter.fillRect()

PySide.QtGui.QPainter.eraseRect(arg__1)

Parameters:	arg__1 – `PySide.QtCore.QRect`

This is an overloaded function.

Erases the area inside the given rectangle .

PySide.QtGui.QPainter.eraseRect(x, y, w, h)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int`

This is an overloaded function.

Erases the area inside the rectangle beginning at (x , y ) with the given width and height .

PySide.QtGui.QPainter.fillPath(path, brush)¶

Parameters:	path – `PySide.QtGui.QPainterPath` brush – `PySide.QtGui.QBrush`

Fills the given path using the given brush . The outline is not drawn.

Alternatively, you can specify a PySide.QtGui.QColor instead of a PySide.QtGui.QBrush ; the PySide.QtGui.QBrush constructor (taking a PySide.QtGui.QColor argument) will automatically create a solid pattern brush.

See also

PySide.QtGui.QPainter.drawPath()

PySide.QtGui.QPainter.fillRect(r, c)¶

Parameters:	r – `PySide.QtCore.QRectF` c – `PySide.QtCore.Qt.GlobalColor`

PySide.QtGui.QPainter.fillRect(r, style)

Parameters:	r – `PySide.QtCore.QRectF` style – `PySide.QtCore.Qt.BrushStyle`

PySide.QtGui.QPainter.fillRect(x, y, w, h, style)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` style – `PySide.QtCore.Qt.BrushStyle`

PySide.QtGui.QPainter.fillRect(x, y, w, h, arg__5)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` arg__5 – `PySide.QtGui.QBrush`

This is an overloaded function.

Fills the rectangle beginning at (x , y ) with the given width and height , using the given brush .

PySide.QtGui.QPainter.fillRect(x, y, w, h, color)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` color – `PySide.QtGui.QColor`

This is an overloaded function.

Fills the rectangle beginning at (x , y ) with the given width and height , using the given color .

PySide.QtGui.QPainter.fillRect(x, y, w, h, c)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` c – `PySide.QtCore.Qt.GlobalColor`

PySide.QtGui.QPainter.fillRect(r, style)

Parameters:	r – `PySide.QtCore.QRect` style – `PySide.QtCore.Qt.BrushStyle`

PySide.QtGui.QPainter.fillRect(arg__1, arg__2)

Parameters:	arg__1 – `PySide.QtCore.QRect` arg__2 – `PySide.QtGui.QBrush`

This is an overloaded function.

Fills the given rectangle with the specified brush .

PySide.QtGui.QPainter.fillRect(arg__1, color)

Parameters:	arg__1 – `PySide.QtCore.QRect` color – `PySide.QtGui.QColor`

This is an overloaded function.

Fills the given rectangle with the color specified.

PySide.QtGui.QPainter.fillRect(arg__1, color)

Parameters:	arg__1 – `PySide.QtCore.QRectF` color – `PySide.QtGui.QColor`

This is an overloaded function.

Fills the given rectangle with the color specified.

PySide.QtGui.QPainter.fillRect(r, c)

Parameters:	r – `PySide.QtCore.QRect` c – `PySide.QtCore.Qt.GlobalColor`

PySide.QtGui.QPainter.fillRect(arg__1, arg__2)

Parameters:	arg__1 – `PySide.QtCore.QRectF` arg__2 – `PySide.QtGui.QBrush`

Fills the given rectangle with the brush specified.

Alternatively, you can specify a PySide.QtGui.QColor instead of a PySide.QtGui.QBrush ; the PySide.QtGui.QBrush constructor (taking a PySide.QtGui.QColor argument) will automatically create a solid pattern brush.

See also

PySide.QtGui.QPainter.drawRect()

PySide.QtGui.QPainter.font()¶

Return type:	`PySide.QtGui.QFont`

Returns the currently set font used for drawing text.

PySide.QtGui.QPainter.fontInfo()¶

Return type:	`PySide.QtGui.QFontInfo`

Returns the font info for the painter if the painter is active. Otherwise, the return value is undefined.

PySide.QtGui.QPainter.fontMetrics()¶

Return type:	`PySide.QtGui.QFontMetrics`

Returns the font metrics for the painter if the painter is active. Otherwise, the return value is undefined.

PySide.QtGui.QPainter.hasClipping()¶

Return type:	`PySide.QtCore.bool`

Returns true if clipping has been set; otherwise returns false.

PySide.QtGui.QPainter.initFrom(widget)¶

Parameters:	widget – `PySide.QtGui.QWidget`

Initializes the painters pen, background and font to the same as the given widget . This function is called automatically when the painter is opened on a PySide.QtGui.QWidget .

PySide.QtGui.QPainter.isActive()¶

Return type:	`PySide.QtCore.bool`

Returns true if PySide.QtGui.QPainter.begin() has been called and PySide.QtGui.QPainter.end() has not yet been called; otherwise returns false.

PySide.QtGui.QPainter.layoutDirection()¶

Return type:	`PySide.QtCore.Qt.LayoutDirection`

Returns the layout direction used by the painter when drawing text.

PySide.QtGui.QPainter.opacity()¶

Return type:	`PySide.QtCore.qreal`

Returns the opacity of the painter. The default value is 1.

See also

PySide.QtGui.QPainter.setOpacity()

PySide.QtGui.QPainter.paintEngine()¶

Return type:	`PySide.QtGui.QPaintEngine`

Returns the paint engine that the painter is currently operating on if the painter is active; otherwise 0.

See also

PySide.QtGui.QPainter.isActive()

PySide.QtGui.QPainter.pen()¶

Return type:	`PySide.QtGui.QPen`

Returns the painter’s current pen.

PySide.QtGui.QPainter.renderHints()¶

Return type:	`PySide.QtGui.QPainter.RenderHints`

Returns a flag that specifies the rendering hints that are set for this painter.

PySide.QtGui.QPainter.resetMatrix()¶

Resets any transformations that were made using PySide.QtGui.QPainter.translate() , PySide.QtGui.QPainter.scale() , PySide.QtGui.QPainter.shear() , PySide.QtGui.QPainter.rotate() , PySide.QtGui.QPainter.setWorldMatrix() , PySide.QtGui.QPainter.setViewport() and PySide.QtGui.QPainter.setWindow() .

It is advisable to use PySide.QtGui.QPainter.resetTransform() instead of this function to preserve the properties of perspective transformations.

See also

Coordinate Transformations

PySide.QtGui.QPainter.resetTransform()¶: Resets any transformations that were made using PySide.QtGui.QPainter.translate() , PySide.QtGui.QPainter.scale() , PySide.QtGui.QPainter.shear() , PySide.QtGui.QPainter.rotate() , PySide.QtGui.QPainter.setWorldTransform() , PySide.QtGui.QPainter.setViewport() and PySide.QtGui.QPainter.setWindow() .

See also

Coordinate Transformations

PySide.QtGui.QPainter.restore()¶: Restores the current painter state (pops a saved state off the stack).

See also

PySide.QtGui.QPainter.save()

static PySide.QtGui.QPainter.restoreRedirected(device)¶

Parameters:	device – `PySide.QtGui.QPaintDevice`

Using QWidget.render() obsoletes the use of this function.

Restores the previous redirection for the given device after a call to PySide.QtGui.QPainter.setRedirected() .

Warning

Making use of redirections in the PySide.QtGui.QPainter API implies that QPainter.begin() and PySide.QtGui.QPaintDevice destructors need to hold a mutex for a short period. This can impact performance. Use of QWidget::render is strongly encouraged.

See also

PySide.QtGui.QPainter.redirected()

PySide.QtGui.QPainter.rotate(a)¶

Parameters:	a – `PySide.QtCore.qreal`

Rotates the coordinate system the given angle clockwise.

See also

PySide.QtGui.QPainter.setWorldTransform() Coordinate Transformations

PySide.QtGui.QPainter.save()¶: Saves the current painter state (pushes the state onto a stack). A PySide.QtGui.QPainter.save() must be followed by a corresponding PySide.QtGui.QPainter.restore() ; the PySide.QtGui.QPainter.end() function unwinds the stack.

See also

PySide.QtGui.QPainter.restore()

PySide.QtGui.QPainter.scale(sx, sy)¶

Parameters:	sx – `PySide.QtCore.qreal` sy – `PySide.QtCore.qreal`

Scales the coordinate system by (sx , sy ).

See also

PySide.QtGui.QPainter.setWorldTransform() Coordinate Transformations

PySide.QtGui.QPainter.setBackground(bg)¶

Parameters:	bg – `PySide.QtGui.QBrush`

Sets the background brush of the painter to the given brush .

The background brush is the brush that is filled in when drawing opaque text, stippled lines and bitmaps. The background brush has no effect in transparent background mode (which is the default).

PySide.QtGui.QPainter.setBackgroundMode(mode)¶

Parameters:	mode – `PySide.QtCore.Qt.BGMode`

PySide.QtGui.QPainter.setBrush(style)¶

Parameters:	style – `PySide.QtCore.Qt.BrushStyle`

PySide.QtGui.QPainter.setBrush(brush)

Parameters:	brush – `PySide.QtGui.QBrush`

Sets the painter’s brush to the given brush .

The painter’s brush defines how shapes are filled.

PySide.QtGui.QPainter.setBrushOrigin(arg__1)¶

Parameters:	arg__1 – `PySide.QtCore.QPointF`

Sets the brush origin to position .

The brush origin specifies the (0, 0) coordinate of the painter’s brush.

Note that while the PySide.QtGui.QPainter.brushOrigin() was necessary to adopt the parent’s background for a widget in Qt 3, this is no longer the case since the Qt 4 painter doesn’t paint the background unless you explicitly tell it to do so by setting the widget’s PySide.QtGui.QWidget.autoFillBackground() property to true.

PySide.QtGui.QPainter.setBrushOrigin(arg__1)

Parameters:	arg__1 – `PySide.QtCore.QPoint`

This is an overloaded function.

Sets the brush’s origin to the given position .

PySide.QtGui.QPainter.setBrushOrigin(x, y)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int`

This is an overloaded function.

Sets the brush’s origin to point (x , y ).

PySide.QtGui.QPainter.setClipPath(path[, op=Qt.ReplaceClip])¶

Parameters:	path – `PySide.QtGui.QPainterPath` op – `PySide.QtCore.Qt.ClipOperation`

PySide.QtGui.QPainter.setClipRect(arg__1[, op=Qt.ReplaceClip])¶

Parameters:	arg__1 – `PySide.QtCore.QRect` op – `PySide.QtCore.Qt.ClipOperation`

PySide.QtGui.QPainter.setClipRect(arg__1[, op=Qt.ReplaceClip])

Parameters:	arg__1 – `PySide.QtCore.QRectF` op – `PySide.QtCore.Qt.ClipOperation`

PySide.QtGui.QPainter.setClipRect(x, y, w, h[, op=Qt.ReplaceClip])

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int` op – `PySide.QtCore.Qt.ClipOperation`

PySide.QtGui.QPainter.setClipRegion(arg__1[, op=Qt.ReplaceClip])¶

Parameters:	arg__1 – `PySide.QtGui.QRegion` op – `PySide.QtCore.Qt.ClipOperation`

PySide.QtGui.QPainter.setClipping(enable)¶

Parameters:	enable – `PySide.QtCore.bool`

Enables clipping if enable is true, or disables clipping if enable is false.

PySide.QtGui.QPainter.setCompositionMode(mode)¶

Parameters:	mode – `PySide.QtGui.QPainter.CompositionMode`

Sets the composition mode to the given mode .

Warning

Only a PySide.QtGui.QPainter operating on a PySide.QtGui.QImage fully supports all composition modes. The RasterOp modes are supported for X11 as described in PySide.QtGui.QPainter.compositionMode() .

PySide.QtGui.QPainter.setFont(f)¶

Parameters:	f – `PySide.QtGui.QFont`

Sets the painter’s font to the given font .

This font is used by subsequent PySide.QtGui.QPainter.drawText() functions. The text color is the same as the pen color.

If you set a font that isn’t available, Qt finds a close match. PySide.QtGui.QPainter.font() will return what you set using PySide.QtGui.QPainter.setFont() and PySide.QtGui.QPainter.fontInfo() returns the font actually being used (which may be the same).

PySide.QtGui.QPainter.setLayoutDirection(direction)¶

Parameters:	direction – `PySide.QtCore.Qt.LayoutDirection`

PySide.QtGui.QPainter.setOpacity(opacity)¶

Parameters:	opacity – `PySide.QtCore.qreal`

Sets the opacity of the painter to opacity . The value should be in the range 0.0 to 1.0, where 0.0 is fully transparent and 1.0 is fully opaque.

Opacity set on the painter will apply to all drawing operations individually.

See also

PySide.QtGui.QPainter.opacity()

PySide.QtGui.QPainter.setPen(color)¶

Parameters:	color – `PySide.QtGui.QColor`

This is an overloaded function.

Sets the painter’s pen to have style Qt.SolidLine , width 0 and the specified color .

PySide.QtGui.QPainter.setPen(pen)

Parameters:	pen – `PySide.QtGui.QPen`

Sets the painter’s pen to be the given pen .

The pen defines how to draw lines and outlines, and it also defines the text color.

PySide.QtGui.QPainter.setPen(style)

Parameters:	style – `PySide.QtCore.Qt.PenStyle`

static PySide.QtGui.QPainter.setRedirected(device, replacement[, offset=QPoint()])¶

Parameters:	device – `PySide.QtGui.QPaintDevice` replacement – `PySide.QtGui.QPaintDevice` offset – `PySide.QtCore.QPoint`

Please use QWidget.render() instead.

Redirects all paint commands for the given paint device , to the replacement device. The optional point offset defines an offset within the source device.

The redirection will not be effective until the PySide.QtGui.QPainter.begin() function has been called; make sure to call PySide.QtGui.QPainter.end() for the given device ‘s painter (if any) before redirecting. Call PySide.QtGui.QPainter.restoreRedirected() to restore the previous redirection.

Warning

Making use of redirections in the PySide.QtGui.QPainter API implies that QPainter.begin() and PySide.QtGui.QPaintDevice destructors need to hold a mutex for a short period. This can impact performance. Use of QWidget::render is strongly encouraged.

See also

PySide.QtGui.QPainter.redirected() PySide.QtGui.QPainter.restoreRedirected()

PySide.QtGui.QPainter.setRenderHint(hint[, on=true])¶

Parameters:	hint – `PySide.QtGui.QPainter.RenderHint` on – `PySide.QtCore.bool`

Sets the given render hint on the painter if on is true; otherwise clears the render hint.

PySide.QtGui.QPainter.setRenderHints(hints[, on=true])¶

Parameters:	hints – `PySide.QtGui.QPainter.RenderHints` on – `PySide.QtCore.bool`

PySide.QtGui.QPainter.setTransform(transform[, combine=false])¶

Parameters:	transform – `PySide.QtGui.QTransform` combine – `PySide.QtCore.bool`

Sets the world transformation matrix. If combine is true, the specified transform is combined with the current matrix; otherwise it replaces the current matrix.

PySide.QtGui.QPainter.setViewTransformEnabled(enable)¶

Parameters:	enable – `PySide.QtCore.bool`

Enables view transformations if enable is true, or disables view transformations if enable is false.

See also

PySide.QtGui.QPainter.viewTransformEnabled() Window-Viewport Conversion

PySide.QtGui.QPainter.setViewport(x, y, w, h)¶

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int`

This is an overloaded function.

Sets the painter’s viewport rectangle to be the rectangle beginning at (x , y ) with the given width and height .

PySide.QtGui.QPainter.setViewport(viewport)

Parameters:	viewport – `PySide.QtCore.QRect`

Sets the painter’s viewport rectangle to the given rectangle , and enables view transformations.

The viewport rectangle is part of the view transformation. The viewport specifies the device coordinate system. Its sister, the PySide.QtGui.QPainter.window() , specifies the logical coordinate system.

The default viewport rectangle is the same as the device’s rectangle.

PySide.QtGui.QPainter.setWindow(window)¶

Parameters:	window – `PySide.QtCore.QRect`

Sets the painter’s window to the given rectangle , and enables view transformations.

The window rectangle is part of the view transformation. The window specifies the logical coordinate system. Its sister, the PySide.QtGui.QPainter.viewport() , specifies the device coordinate system.

The default window rectangle is the same as the device’s rectangle.

PySide.QtGui.QPainter.setWindow(x, y, w, h)

Parameters:	x – `PySide.QtCore.int` y – `PySide.QtCore.int` w – `PySide.QtCore.int` h – `PySide.QtCore.int`

This is an overloaded function.

Sets the painter’s window to the rectangle beginning at (x , y ) and the given width and height .

PySide.QtGui.QPainter.setWorldMatrix(matrix[, combine=false])¶

Parameters:	matrix – `PySide.QtGui.QMatrix` combine – `PySide.QtCore.bool`

Sets the transformation matrix to matrix and enables transformations.

Note

It is advisable to use PySide.QtGui.QPainter.setWorldTransform() instead of this function to preserve the properties of perspective transformations.

If combine is true, then matrix is combined with the current transformation matrix; otherwise matrix replaces the current transformation matrix.

If matrix is the identity matrix and combine is false, this function calls setWorldMatrixEnabled(false). (The identity matrix is the matrix where QMatrix.m11() and QMatrix.m22() are 1.0 and the rest are 0.0.)

The following functions can transform the coordinate system without using a PySide.QtGui.QMatrix :

PySide.QtGui.QPainter.translate()
PySide.QtGui.QPainter.scale()
PySide.QtGui.QPainter.shear()
PySide.QtGui.QPainter.rotate()

They operate on the painter’s PySide.QtGui.QPainter.worldMatrix() and are implemented like this:

def rotate(self, angle):
    matrix = QMatrix()
    matrix.rotate(angle)
    setWorldMatrix(matrix, true)

Note that when using PySide.QtGui.QPainter.setWorldMatrix() function you should always have combine be true when you are drawing into a PySide.QtGui.QPicture . Otherwise it may not be possible to replay the picture with additional transformations; using the PySide.QtGui.QPainter.translate() , PySide.QtGui.QPainter.scale() , etc. convenience functions is safe.

For more information about the coordinate system, transformations and window-viewport conversion, see Coordinate System .

PySide.QtGui.QPainter.setWorldMatrixEnabled(enabled)¶

Parameters:	enabled – `PySide.QtCore.bool`

Enables transformations if enable is true, or disables transformations if enable is false. The world transformation matrix is not changed.

PySide.QtGui.QPainter.setWorldTransform(matrix[, combine=false])¶

Parameters:	matrix – `PySide.QtGui.QTransform` combine – `PySide.QtCore.bool`

Sets the world transformation matrix. If combine is true, the specified matrix is combined with the current matrix; otherwise it replaces the current matrix.

PySide.QtGui.QPainter.shear(sh, sv)¶

Parameters:	sh – `PySide.QtCore.qreal` sv – `PySide.QtCore.qreal`

Shears the coordinate system by (sh , sv ).

See also

PySide.QtGui.QPainter.setWorldTransform() Coordinate Transformations

PySide.QtGui.QPainter.strokePath(path, pen)¶

Parameters:	path – `PySide.QtGui.QPainterPath` pen – `PySide.QtGui.QPen`

Draws the outline (strokes) the path path with the pen specified by pen

PySide.QtGui.QPainter.testRenderHint(hint)¶

Parameters:	hint – `PySide.QtGui.QPainter.RenderHint`
Return type:	`PySide.QtCore.bool`

Returns true if hint is set; otherwise returns false.

PySide.QtGui.QPainter.transform()¶

Return type:	`PySide.QtGui.QTransform`

Returns the world transformation matrix.

PySide.QtGui.QPainter.translate(offset)¶

Parameters:	offset – `PySide.QtCore.QPointF`

Translates the coordinate system by the given offset ; i.e. the given offset is added to points.

See also

PySide.QtGui.QPainter.setWorldTransform() Coordinate Transformations

PySide.QtGui.QPainter.translate(offset)

Parameters:	offset – `PySide.QtCore.QPoint`

This is an overloaded function.

Translates the coordinate system by the given offset .

PySide.QtGui.QPainter.translate(dx, dy)

Parameters:	dx – `PySide.QtCore.qreal` dy – `PySide.QtCore.qreal`

This is an overloaded function.

Translates the coordinate system by the vector (dx , dy ).

PySide.QtGui.QPainter.viewTransformEnabled()¶

Return type:	`PySide.QtCore.bool`

Returns true if view transformation is enabled; otherwise returns false.

PySide.QtGui.QPainter.viewport()¶

Return type:	`PySide.QtCore.QRect`

Returns the viewport rectangle.

PySide.QtGui.QPainter.window()¶

Return type:	`PySide.QtCore.QRect`

Returns the window rectangle.

PySide.QtGui.QPainter.worldMatrix()¶

Return type:	`PySide.QtGui.QMatrix`

Returns the world transformation matrix.

It is advisable to use PySide.QtGui.QPainter.worldTransform() because PySide.QtGui.QPainter.worldMatrix() does not preserve the properties of perspective transformations.

See also

PySide.QtGui.QPainter.setWorldMatrix() Coordinate Transformations Coordinate System

PySide.QtGui.QPainter.worldMatrixEnabled()¶

Return type:	`PySide.QtCore.bool`

Returns true if world transformation is enabled; otherwise returns false.

PySide.QtGui.QPainter.worldTransform()¶

Return type:	`PySide.QtGui.QTransform`

Returns the world transformation matrix.

Table Of Contents

Previous topic

Next topic

QPainter¶

Synopsis¶

Functions¶

Static functions¶

Detailed Description¶

Settings¶

Drawing¶

Rendering Quality¶

Coordinate Transformations¶

Clipping¶

Composition Modes¶

Limitations¶

Performance¶

Table Of Contents

Previous topic

Next topic

Quick search

QPainter¶

Synopsis¶

Functions¶

Static functions¶

Detailed Description¶

Settings¶

Drawing¶

Rendering Quality¶

Coordinate Transformations¶

Clipping¶

Composition Modes¶

Limitations¶

Performance¶