QAbstractItemView¶

Inheritance diagram of QAbstractItemView

Inherited by: QHeaderView, QTreeView, QTreeWidget, QHelpContentWidget, QColumnView, QTableView, QTableWidget, QListView, QHelpIndexWidget, QUndoView, QListWidget

Synopsis¶

Functions¶

def alternatingRowColors ()
def autoScrollMargin ()
def closePersistentEditor (index)
def currentIndex ()
def defaultDropAction ()
def dirtyRegionOffset ()
def doAutoScroll ()
def dragDropMode ()
def dragDropOverwriteMode ()
def dragEnabled ()
def dropIndicatorPosition ()
def editTriggers ()
def executeDelayedItemsLayout ()
def hasAutoScroll ()
def horizontalScrollMode ()
def iconSize ()
def indexWidget (index)
def itemDelegate ()
def itemDelegate (index)
def itemDelegateForColumn (column)
def itemDelegateForRow (row)
def model ()
def openPersistentEditor (index)
def rootIndex ()
def scheduleDelayedItemsLayout ()
def scrollDirtyRegion (dx, dy)
def selectionBehavior ()
def selectionMode ()
def selectionModel ()
def setAlternatingRowColors (enable)
def setAutoScroll (enable)
def setAutoScrollMargin (margin)
def setDefaultDropAction (dropAction)
def setDirtyRegion (region)
def setDragDropMode (behavior)
def setDragDropOverwriteMode (overwrite)
def setDragEnabled (enable)
def setDropIndicatorShown (enable)
def setEditTriggers (triggers)
def setHorizontalScrollMode (mode)
def setIconSize (size)
def setIndexWidget (index, widget)
def setItemDelegate (delegate)
def setItemDelegateForColumn (column, delegate)
def setItemDelegateForRow (row, delegate)
def setSelectionBehavior (behavior)
def setSelectionMode (mode)
def setState (state)
def setTabKeyNavigation (enable)
def setTextElideMode (mode)
def setVerticalScrollMode (mode)
def showDropIndicator ()
def sizeHintForIndex (index)
def startAutoScroll ()
def state ()
def stopAutoScroll ()
def tabKeyNavigation ()
def textElideMode ()
def verticalScrollMode ()

Virtual functions¶

def closeEditor (editor, hint)
def commitData (editor)
def currentChanged (current, previous)
def dataChanged (topLeft, bottomRight)
def doItemsLayout ()
def edit (index, trigger, event)
def editorDestroyed (editor)
def horizontalOffset ()
def horizontalScrollbarAction (action)
def horizontalScrollbarValueChanged (value)
def indexAt (point)
def isIndexHidden (index)
def keyboardSearch (search)
def moveCursor (cursorAction, modifiers)
def reset ()
def rowsAboutToBeRemoved (parent, start, end)
def rowsInserted (parent, start, end)
def scrollTo (index[, hint=EnsureVisible])
def selectAll ()
def selectedIndexes ()
def selectionChanged (selected, deselected)
def selectionCommand (index[, event=None])
def setModel (model)
def setRootIndex (index)
def setSelection (rect, command)
def setSelectionModel (selectionModel)
def sizeHintForColumn (column)
def sizeHintForRow (row)
def startDrag (supportedActions)
def updateEditorData ()
def updateEditorGeometries ()
def updateGeometries ()
def verticalOffset ()
def verticalScrollbarAction (action)
def verticalScrollbarValueChanged (value)
def viewOptions ()
def visualRect (index)
def visualRegionForSelection (selection)

Slots¶

def clearSelection ()
def edit (index)
def scrollToBottom ()
def scrollToTop ()
def setCurrentIndex (index)
def update (index)

Signals¶

def activated (index)
def clicked (index)
def doubleClicked (index)
def entered (index)
def pressed (index)
def viewportEntered ()

Detailed Description¶

The PySide.QtGui.QAbstractItemView class provides the basic functionality for item view classes.

PySide.QtGui.QAbstractItemView class is the base class for every standard view that uses a PySide.QtCore.QAbstractItemModel . PySide.QtGui.QAbstractItemView is an abstract class and cannot itself be instantiated. It provides a standard interface for interoperating with models through the signals and slots mechanism, enabling subclasses to be kept up-to-date with changes to their models. This class provides standard support for keyboard and mouse navigation, viewport scrolling, item editing, and selections. The keyboard navigation implements this functionality:

Keys Functionality

Arrow keys Changes the current item and selects it.

Ctrl+Arrow keys Changes the current item but does not select it.

Shift+Arrow keys Changes the current item and selects it. The previously selected item(s) is not deselected.

Ctr+Space Toggles selection of the current item.

Tab/Backtab Changes the current item to the next/previous item.

Home/End Selects the first/last item in the model.

Page up/Page down Scrolls the rows shown up/down by the number of visible rows in the view.

Ctrl+A Selects all items in the model.

Note that the above table assumes that the selection mode allows the operations. For instance, you cannot select items if the selection mode is QAbstractItemView.NoSelection .

The PySide.QtGui.QAbstractItemView class is one of the Model/View Classes and is part of Qt’s model/view framework .

The view classes that inherit PySide.QtGui.QAbstractItemView only need to implement their own view-specific functionality, such as drawing items, returning the geometry of items, finding items, etc.

PySide.QtGui.QAbstractItemView provides common slots such as PySide.QtGui.QAbstractItemView.edit() and PySide.QtGui.QAbstractItemView.setCurrentIndex() . Many protected slots are also provided, including PySide.QtGui.QAbstractItemView.dataChanged() , PySide.QtGui.QAbstractItemView.rowsInserted() , PySide.QtGui.QAbstractItemView.rowsAboutToBeRemoved() , PySide.QtGui.QAbstractItemView.selectionChanged() , and PySide.QtGui.QAbstractItemView.currentChanged() .

The root item is returned by PySide.QtGui.QAbstractItemView.rootIndex() , and the current item by PySide.QtGui.QAbstractItemView.currentIndex() . To make sure that an item is visible use PySide.QtGui.QAbstractItemView.scrollTo() .

Some of PySide.QtGui.QAbstractItemView ‘s functions are concerned with scrolling, for example PySide.QtGui.QAbstractItemView.setHorizontalScrollMode() and PySide.QtGui.QAbstractItemView.setVerticalScrollMode() . To set the range of the scroll bars, you can, for example, reimplement the view’s PySide.QtGui.QAbstractItemView.resizeEvent() function:
def resizeEvent(self, event):
    horizontalScrollBar().setRange(0, realWidth - width())
    ...
Note that the range is not updated until the widget is shown.

Several other functions are concerned with selection control; for example PySide.QtGui.QAbstractItemView.setSelectionMode() , and PySide.QtGui.QAbstractItemView.setSelectionBehavior() . This class provides a default selection model to work with ( PySide.QtGui.QAbstractItemView.selectionModel() ), but this can be replaced by using PySide.QtGui.QAbstractItemView.setSelectionModel() with an instance of PySide.QtGui.QItemSelectionModel .

For complete control over the display and editing of items you can specify a delegate with PySide.QtGui.QAbstractItemView.setItemDelegate() .

PySide.QtGui.QAbstractItemView provides a lot of protected functions. Some are concerned with editing, for example, PySide.QtGui.QAbstractItemView.edit() , and PySide.QtGui.QAbstractItemView.commitData() , whilst others are keyboard and mouse event handlers.

Note

If you inherit PySide.QtGui.QAbstractItemView and intend to update the contents of the viewport, you should use viewport-> PySide.QtGui.QAbstractItemView.update() instead of PySide.QtGui.QWidget.update() as all painting operations take place on the viewport.

See also

View Classes Model/View Programming PySide.QtCore.QAbstractItemModel Chart Example

class PySide.QtGui.QAbstractItemView([parent=None])¶

Parameters:	parent – `PySide.QtGui.QWidget`

Constructs an abstract item view with the given parent .

PySide.QtGui.QAbstractItemView.DragDropMode¶

Describes the various drag and drop events the view can act upon. By default the view does not support dragging or dropping (NoDragDrop ).

Constant	Description
QAbstractItemView.NoDragDrop	Does not support dragging or dropping.
QAbstractItemView.DragOnly	The view supports dragging of its own items
QAbstractItemView.DropOnly	The view accepts drops
QAbstractItemView.DragDrop	The view supports both dragging and dropping
QAbstractItemView.InternalMove	The view accepts move (not copy) operations only from itself.

Note that the model used needs to provide support for drag and drop operations.

See also

PySide.QtGui.QAbstractItemView.setDragDropMode() Using drag and drop with item views

PySide.QtGui.QAbstractItemView.SelectionBehavior¶

Constant	Description
QAbstractItemView.SelectItems	Selecting single items.
QAbstractItemView.SelectRows	Selecting only rows.
QAbstractItemView.SelectColumns	Selecting only columns.

PySide.QtGui.QAbstractItemView.EditTrigger¶

This enum describes actions which will initiate item editing.

Constant	Description
QAbstractItemView.NoEditTriggers	No editing possible.
QAbstractItemView.CurrentChanged	Editing start whenever current item changes.
QAbstractItemView.DoubleClicked	Editing starts when an item is double clicked.
QAbstractItemView.SelectedClicked	Editing starts when clicking on an already selected item.
QAbstractItemView.EditKeyPressed	Editing starts when the platform edit key has been pressed over an item.
QAbstractItemView.AnyKeyPressed	Editing starts when any key is pressed over an item.
QAbstractItemView.AllEditTriggers	Editing starts for all above actions.

PySide.QtGui.QAbstractItemView.ScrollMode¶

Constant	Description
QAbstractItemView.ScrollPerItem	The view will scroll the contents one item at a time.
QAbstractItemView.ScrollPerPixel	The view will scroll the contents one pixel at a time.

PySide.QtGui.QAbstractItemView.CursorAction¶

This enum describes the different ways to navigate between items,

Constant	Description
QAbstractItemView.MoveUp	Move to the item above the current item.
QAbstractItemView.MoveDown	Move to the item below the current item.
QAbstractItemView.MoveLeft	Move to the item left of the current item.
QAbstractItemView.MoveRight	Move to the item right of the current item.
QAbstractItemView.MoveHome	Move to the top-left corner item.
QAbstractItemView.MoveEnd	Move to the bottom-right corner item.
QAbstractItemView.MovePageUp	Move one page up above the current item.
QAbstractItemView.MovePageDown	Move one page down below the current item.
QAbstractItemView.MoveNext	Move to the item after the current item.
QAbstractItemView.MovePrevious	Move to the item before the current item.

PySide.QtGui.QAbstractItemView.DropIndicatorPosition¶

This enum indicates the position of the drop indicator in relation to the index at the current mouse position:

Constant	Description
QAbstractItemView.OnItem	The item will be dropped on the index.
QAbstractItemView.AboveItem	The item will be dropped above the index.
QAbstractItemView.BelowItem	The item will be dropped below the index.
QAbstractItemView.OnViewport	The item will be dropped onto a region of the viewport with no items. The way each view handles items dropped onto the viewport depends on the behavior of the underlying model in use.

PySide.QtGui.QAbstractItemView.ScrollHint¶

Constant	Description
QAbstractItemView.EnsureVisible	Scroll to ensure that the item is visible.
QAbstractItemView.PositionAtTop	Scroll to position the item at the top of the viewport.
QAbstractItemView.PositionAtBottom	Scroll to position the item at the bottom of the viewport.
QAbstractItemView.PositionAtCenter	Scroll to position the item at the center of the viewport.

PySide.QtGui.QAbstractItemView.SelectionMode¶

This enum indicates how the view responds to user selections:

Constant	Description
QAbstractItemView.SingleSelection	When the user selects an item, any already-selected item becomes unselected, and the user cannot unselect the selected item by clicking on it.
QAbstractItemView.ContiguousSelection	When the user selects an item in the usual way, the selection is cleared and the new item selected. However, if the user presses the Shift key while clicking on an item, all items between the current item and the clicked item are selected or unselected, depending on the state of the clicked item.
QAbstractItemView.ExtendedSelection	When the user selects an item in the usual way, the selection is cleared and the new item selected. However, if the user presses the Ctrl key when clicking on an item, the clicked item gets toggled and all other items are left untouched. If the user presses the Shift key while clicking on an item, all items between the current item and the clicked item are selected or unselected, depending on the state of the clicked item. Multiple items can be selected by dragging the mouse over them.
QAbstractItemView.MultiSelection	When the user selects an item in the usual way, the selection status of that item is toggled and the other items are left alone. Multiple items can be toggled by dragging the mouse over them.
QAbstractItemView.NoSelection	Items cannot be selected.

The most commonly used modes are SingleSelection and ExtendedSelection .

PySide.QtGui.QAbstractItemView.State¶

Describes the different states the view can be in. This is usually only interesting when reimplementing your own view.

Constant	Description
QAbstractItemView.NoState	The is the default state.
QAbstractItemView.DraggingState	The user is dragging items.
QAbstractItemView.DragSelectingState	The user is selecting items.
QAbstractItemView.EditingState	The user is editing an item in a widget editor.
QAbstractItemView.ExpandingState	The user is opening a branch of items.
QAbstractItemView.CollapsingState	The user is closing a branch of items.
QAbstractItemView.AnimatingState	The item view is performing an animation.

PySide.QtGui.QAbstractItemView.activated(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

PySide.QtGui.QAbstractItemView.alternatingRowColors()¶

Return type:	`PySide.QtCore.bool`

This property holds whether to draw the background using alternating colors.

If this property is true, the item background will be drawn using QPalette.Base and QPalette.AlternateBase ; otherwise the background will be drawn using the QPalette.Base color.

By default, this property is false.

PySide.QtGui.QAbstractItemView.autoScrollMargin()¶

Return type:	`PySide.QtCore.int`

This property holds the size of the area when auto scrolling is triggered.

This property controls the size of the area at the edge of the viewport that triggers autoscrolling. The default value is 16 pixels.

PySide.QtGui.QAbstractItemView.clearSelection()¶: Deselects all selected items. The current index will not be changed.

See also

PySide.QtGui.QAbstractItemView.setSelection() PySide.QtGui.QAbstractItemView.selectAll()

PySide.QtGui.QAbstractItemView.clicked(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

PySide.QtGui.QAbstractItemView.closeEditor(editor, hint)¶

Parameters:	editor – `PySide.QtGui.QWidget` hint – `PySide.QtGui.QAbstractItemDelegate.EndEditHint`

PySide.QtGui.QAbstractItemView.closePersistentEditor(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

Closes the persistent editor for the item at the given index .

PySide.QtGui.QAbstractItemView.commitData(editor)¶

Parameters:	editor – `PySide.QtGui.QWidget`

Commit the data in the editor to the model.

PySide.QtGui.QAbstractItemView.currentChanged(current, previous)¶

Parameters:	current – `PySide.QtCore.QModelIndex` previous – `PySide.QtCore.QModelIndex`

This slot is called when a new item becomes the current item. The previous current item is specified by the previous index, and the new item by the current index.

If you want to know about changes to items see the PySide.QtGui.QAbstractItemView.dataChanged() signal.

PySide.QtGui.QAbstractItemView.currentIndex()¶

Return type:	`PySide.QtCore.QModelIndex`

Returns the model index of the current item.

PySide.QtGui.QAbstractItemView.dataChanged(topLeft, bottomRight)¶

Parameters:	topLeft – `PySide.QtCore.QModelIndex` bottomRight – `PySide.QtCore.QModelIndex`

This slot is called when items are changed in the model. The changed items are those from topLeft to bottomRight inclusive. If just one item is changed topLeft == bottomRight .

PySide.QtGui.QAbstractItemView.defaultDropAction()¶

Return type:	`PySide.QtCore.Qt.DropAction`

This property holds the drop action that will be used by default in QAbstractItemView::drag().

If the property is not set, the drop action is CopyAction when the supported actions support CopyAction.

PySide.QtGui.QAbstractItemView.dirtyRegionOffset()¶

Return type:	`PySide.QtCore.QPoint`

Returns the offset of the dirty regions in the view.

If you use PySide.QtGui.QAbstractItemView.scrollDirtyRegion() and implement a PySide.QtGui.QAbstractScrollArea.paintEvent() in a subclass of PySide.QtGui.QAbstractItemView , you should translate the area given by the paint event with the offset returned from this function.

PySide.QtGui.QAbstractItemView.doAutoScroll()¶

PySide.QtGui.QAbstractItemView.doItemsLayout()¶: This function is intended to lay out the items in the view. The default implementation just calls PySide.QtGui.QAbstractItemView.updateGeometries() and updates the viewport.

PySide.QtGui.QAbstractItemView.doubleClicked(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

PySide.QtGui.QAbstractItemView.dragDropMode()¶

Return type:	`PySide.QtGui.QAbstractItemView.DragDropMode`

This property holds the drag and drop event the view will act upon.

PySide.QtGui.QAbstractItemView.dragDropOverwriteMode()¶

Return type:	`PySide.QtCore.bool`

This property holds the view’s drag and drop behavior.

If its value is true , the selected data will overwrite the existing item data when dropped, while moving the data will clear the item. If its value is false , the selected data will be inserted as a new item when the data is dropped. When the data is moved, the item is removed as well.

The default value is false , as in the PySide.QtGui.QListView and PySide.QtGui.QTreeView subclasses. In the PySide.QtGui.QTableView subclass, on the other hand, the property has been set to true .

Note: This is not intended to prevent overwriting of items. The model’s implementation of flags() should do that by not returning Qt.ItemIsDropEnabled .

PySide.QtGui.QAbstractItemView.dragEnabled()¶

Return type:	`PySide.QtCore.bool`

This property holds whether the view supports dragging of its own items.

PySide.QtGui.QAbstractItemView.dropIndicatorPosition()¶

Return type:	`PySide.QtGui.QAbstractItemView.DropIndicatorPosition`

Returns the position of the drop indicator in relation to the closest item.

PySide.QtGui.QAbstractItemView.edit(index, trigger, event)¶

Parameters:	index – `PySide.QtCore.QModelIndex` trigger – `PySide.QtGui.QAbstractItemView.EditTrigger` event – `PySide.QtCore.QEvent`
Return type:	`PySide.QtCore.bool`

Starts editing the item at index , creating an editor if necessary, and returns true if the view’s QAbstractItemView.State is now EditingState ; otherwise returns false.

The action that caused the editing process is described by trigger , and the associated event is specified by event .

Editing can be forced by specifying the trigger to be QAbstractItemView.AllEditTriggers .

PySide.QtGui.QAbstractItemView.edit(index)

Parameters:	index – `PySide.QtCore.QModelIndex`

Starts editing the item corresponding to the given index if it is editable.

Note that this function does not change the current index. Since the current index defines the next and previous items to edit, users may find that keyboard navigation does not work as expected. To provide consistent navigation behavior, call PySide.QtGui.QAbstractItemView.setCurrentIndex() before this function with the same model index.

See also

QModelIndex.flags()

PySide.QtGui.QAbstractItemView.editTriggers()¶

Return type:	`PySide.QtGui.QAbstractItemView.EditTriggers`

This property holds which actions will initiate item editing.

This property is a selection of flags defined by QAbstractItemView.EditTrigger , combined using the OR operator. The view will only initiate the editing of an item if the action performed is set in this property.

PySide.QtGui.QAbstractItemView.editorDestroyed(editor)¶

Parameters:	editor – `PySide.QtCore.QObject`

This function is called when the given editor has been destroyed.

PySide.QtGui.QAbstractItemView.entered(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

PySide.QtGui.QAbstractItemView.executeDelayedItemsLayout()¶: Executes the scheduled layouts without waiting for the event processing to begin.

See also

PySide.QtGui.QAbstractItemView.scheduleDelayedItemsLayout()

PySide.QtGui.QAbstractItemView.hasAutoScroll()¶

Return type:	`PySide.QtCore.bool`

This property holds whether autoscrolling in drag move events is enabled.

If this property is set to true (the default), the PySide.QtGui.QAbstractItemView automatically scrolls the contents of the view if the user drags within 16 pixels of the viewport edge. If the current item changes, then the view will scroll automatically to ensure that the current item is fully visible.

This property only works if the viewport accepts drops. Autoscroll is switched off by setting this property to false.

PySide.QtGui.QAbstractItemView.horizontalOffset()¶

Return type:	`PySide.QtCore.int`

Returns the horizontal offset of the view.

In the base class this is a pure virtual function.

PySide.QtGui.QAbstractItemView.horizontalScrollMode()¶

Return type:	`PySide.QtGui.QAbstractItemView.ScrollMode`

This property holds how the view scrolls its contents in the horizontal direction.

This property controls how the view scroll its contents horizontally. Scrolling can be done either per pixel or per item.

PySide.QtGui.QAbstractItemView.horizontalScrollbarAction(action)¶

Parameters:	action – `PySide.QtCore.int`

PySide.QtGui.QAbstractItemView.horizontalScrollbarValueChanged(value)¶

Parameters:	value – `PySide.QtCore.int`

PySide.QtGui.QAbstractItemView.iconSize()¶

Return type:	`PySide.QtCore.QSize`

This property holds the size of items’ icons.

Setting this property when the view is visible will cause the items to be laid out again.

PySide.QtGui.QAbstractItemView.indexAt(point)¶

Parameters:	point – `PySide.QtCore.QPoint`
Return type:	`PySide.QtCore.QModelIndex`

Returns the model index of the item at the viewport coordinates point .

In the base class this is a pure virtual function.

PySide.QtGui.QAbstractItemView.indexWidget(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`
Return type:	`PySide.QtGui.QWidget`

Returns the widget for the item at the given index .

PySide.QtGui.QAbstractItemView.isIndexHidden(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`
Return type:	`PySide.QtCore.bool`

Returns true if the item referred to by the given index is hidden in the view, otherwise returns false.

Hiding is a view specific feature. For example in TableView a column can be marked as hidden or a row in the TreeView.

In the base class this is a pure virtual function.

PySide.QtGui.QAbstractItemView.itemDelegate()¶

Return type:	`PySide.QtGui.QAbstractItemDelegate`

Returns the item delegate used by this view and model. This is either one set with PySide.QtGui.QAbstractItemView.setItemDelegate() , or the default one.

PySide.QtGui.QAbstractItemView.itemDelegate(index)

Parameters:	index – `PySide.QtCore.QModelIndex`
Return type:	`PySide.QtGui.QAbstractItemDelegate`

Returns the item delegate used by this view and model for the given index .

PySide.QtGui.QAbstractItemView.itemDelegateForColumn(column)¶

Parameters:	column – `PySide.QtCore.int`
Return type:	`PySide.QtGui.QAbstractItemDelegate`

Returns the item delegate used by this view and model for the given column . You can call PySide.QtGui.QAbstractItemView.itemDelegate() to get a pointer to the current delegate for a given index.

PySide.QtGui.QAbstractItemView.itemDelegateForRow(row)¶

Parameters:	row – `PySide.QtCore.int`
Return type:	`PySide.QtGui.QAbstractItemDelegate`

Returns the item delegate used by this view and model for the given row , or 0 if no delegate has been assigned. You can call PySide.QtGui.QAbstractItemView.itemDelegate() to get a pointer to the current delegate for a given index.

PySide.QtGui.QAbstractItemView.keyboardSearch(search)¶

Parameters:	search – unicode

Moves to and selects the item best matching the string search . If no item is found nothing happens.

In the default implementation, the search is reset if search is empty, or the time interval since the last search has exceeded QApplication.keyboardInputInterval() .

PySide.QtGui.QAbstractItemView.model()¶

Return type:	`PySide.QtCore.QAbstractItemModel`

Returns the model that this view is presenting.

PySide.QtGui.QAbstractItemView.moveCursor(cursorAction, modifiers)¶

Parameters:	cursorAction – `PySide.QtGui.QAbstractItemView.CursorAction` modifiers – `PySide.QtCore.Qt.KeyboardModifiers`
Return type:	`PySide.QtCore.QModelIndex`

PySide.QtGui.QAbstractItemView.openPersistentEditor(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

Opens a persistent editor on the item at the given index . If no editor exists, the delegate will create a new editor.

PySide.QtGui.QAbstractItemView.pressed(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

PySide.QtGui.QAbstractItemView.reset()¶: Reset the internal state of the view.

Warning

This function will reset open editors, scroll bar positions, selections, etc. Existing changes will not be committed. If you would like to save your changes when resetting the view, you can reimplement this function, commit your changes, and then call the superclass’ implementation.

PySide.QtGui.QAbstractItemView.rootIndex()¶

Return type:	`PySide.QtCore.QModelIndex`

Returns the model index of the model’s root item. The root item is the parent item to the view’s toplevel items. The root can be invalid.

PySide.QtGui.QAbstractItemView.rowsAboutToBeRemoved(parent, start, end)¶

Parameters:	parent – `PySide.QtCore.QModelIndex` start – `PySide.QtCore.int` end – `PySide.QtCore.int`

This slot is called when rows are about to be removed. The deleted rows are those under the given parent from start to end inclusive.

PySide.QtGui.QAbstractItemView.rowsInserted(parent, start, end)¶

Parameters:	parent – `PySide.QtCore.QModelIndex` start – `PySide.QtCore.int` end – `PySide.QtCore.int`

This slot is called when rows are inserted. The new rows are those under the given parent from start to end inclusive. The base class implementation calls fetchMore() on the model to check for more data.

PySide.QtGui.QAbstractItemView.scheduleDelayedItemsLayout()¶

Schedules a layout of the items in the view to be executed when the event processing starts.

Even if PySide.QtGui.QAbstractItemView.scheduleDelayedItemsLayout() is called multiple times before events are processed, the view will only do the layout once.

PySide.QtGui.QAbstractItemView.scrollDirtyRegion(dx, dy)¶

Parameters:	dx – `PySide.QtCore.int` dy – `PySide.QtCore.int`

Prepares the view for scrolling by (dx ,``dy`` ) pixels by moving the dirty regions in the opposite direction. You only need to call this function if you are implementing a scrolling viewport in your view subclass.

If you implement PySide.QtGui.QAbstractScrollArea.scrollContentsBy() in a subclass of PySide.QtGui.QAbstractItemView , call this function before you call QWidget.scroll() on the viewport. Alternatively, just call PySide.QtGui.QAbstractItemView.update() .

PySide.QtGui.QAbstractItemView.scrollTo(index[, hint=EnsureVisible])¶

Parameters:	index – `PySide.QtCore.QModelIndex` hint – `PySide.QtGui.QAbstractItemView.ScrollHint`

Scrolls the view if necessary to ensure that the item at index is visible. The view will try to position the item according to the given hint .

In the base class this is a pure virtual function.

PySide.QtGui.QAbstractItemView.scrollToBottom()¶: Scrolls the view to the bottom.

See also

PySide.QtGui.QAbstractItemView.scrollTo() PySide.QtGui.QAbstractItemView.scrollToTop()

PySide.QtGui.QAbstractItemView.scrollToTop()¶: Scrolls the view to the top.

See also

PySide.QtGui.QAbstractItemView.scrollTo() PySide.QtGui.QAbstractItemView.scrollToBottom()

PySide.QtGui.QAbstractItemView.selectAll()¶: Selects all items in the view. This function will use the selection behavior set on the view when selecting.

See also

PySide.QtGui.QAbstractItemView.setSelection() PySide.QtGui.QAbstractItemView.selectedIndexes() PySide.QtGui.QAbstractItemView.clearSelection()

PySide.QtGui.QAbstractItemView.selectedIndexes()¶

Return type:

This convenience function returns a list of all selected and non-hidden item indexes in the view. The list contains no duplicates, and is not sorted.

See also

QItemSelectionModel.selectedIndexes()

PySide.QtGui.QAbstractItemView.selectionBehavior()¶

Return type:	`PySide.QtGui.QAbstractItemView.SelectionBehavior`

This property holds which selection behavior the view uses.

This property holds whether selections are done in terms of single items, rows or columns.

See also

QAbstractItemView.SelectionMode QAbstractItemView.SelectionBehavior

PySide.QtGui.QAbstractItemView.selectionChanged(selected, deselected)¶

Parameters:	selected – `PySide.QtGui.QItemSelection` deselected – `PySide.QtGui.QItemSelection`

This slot is called when the selection is changed. The previous selection (which may be empty), is specified by deselected , and the new selection by selected .

PySide.QtGui.QAbstractItemView.selectionCommand(index[, event=None])¶

Parameters:	index – `PySide.QtCore.QModelIndex` event – `PySide.QtCore.QEvent`
Return type:	`PySide.QtGui.QItemSelectionModel.SelectionFlags`

Returns the SelectionFlags to be used when updating a selection with to include the index specified. The event is a user input event, such as a mouse or keyboard event.

Reimplement this function to define your own selection behavior.

PySide.QtGui.QAbstractItemView.selectionMode()¶

Return type:	`PySide.QtGui.QAbstractItemView.SelectionMode`

This property holds which selection mode the view operates in.

This property controls whether the user can select one or many items and, in many-item selections, whether the selection must be a continuous range of items.

See also

QAbstractItemView.SelectionMode QAbstractItemView.SelectionBehavior

PySide.QtGui.QAbstractItemView.selectionModel()¶

Return type:	`PySide.QtGui.QItemSelectionModel`

Returns the current selection model.

PySide.QtGui.QAbstractItemView.setAlternatingRowColors(enable)¶

Parameters:	enable – `PySide.QtCore.bool`

This property holds whether to draw the background using alternating colors.

If this property is true, the item background will be drawn using QPalette.Base and QPalette.AlternateBase ; otherwise the background will be drawn using the QPalette.Base color.

By default, this property is false.

PySide.QtGui.QAbstractItemView.setAutoScroll(enable)¶

Parameters:	enable – `PySide.QtCore.bool`

This property holds whether autoscrolling in drag move events is enabled.

If this property is set to true (the default), the PySide.QtGui.QAbstractItemView automatically scrolls the contents of the view if the user drags within 16 pixels of the viewport edge. If the current item changes, then the view will scroll automatically to ensure that the current item is fully visible.

This property only works if the viewport accepts drops. Autoscroll is switched off by setting this property to false.

PySide.QtGui.QAbstractItemView.setAutoScrollMargin(margin)¶

Parameters:	margin – `PySide.QtCore.int`

This property holds the size of the area when auto scrolling is triggered.

This property controls the size of the area at the edge of the viewport that triggers autoscrolling. The default value is 16 pixels.

PySide.QtGui.QAbstractItemView.setCurrentIndex(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

Sets the current item to be the item at index .

Unless the current selection mode is NoSelection , the item is also be selected. Note that this function also updates the starting position for any new selections the user performs.

To set an item as the current item without selecting it, call

selectionModel()->setCurrentIndex(index, QItemSelectionModel::NoUpdate);

PySide.QtGui.QAbstractItemView.setDefaultDropAction(dropAction)¶

Parameters:	dropAction – `PySide.QtCore.Qt.DropAction`

This property holds the drop action that will be used by default in QAbstractItemView::drag().

If the property is not set, the drop action is CopyAction when the supported actions support CopyAction.

PySide.QtGui.QAbstractItemView.setDirtyRegion(region)¶

Parameters:	region – `PySide.QtGui.QRegion`

Marks the given region as dirty and schedules it to be updated. You only need to call this function if you are implementing your own view subclass.

PySide.QtGui.QAbstractItemView.setDragDropMode(behavior)¶

Parameters:	behavior – `PySide.QtGui.QAbstractItemView.DragDropMode`

This property holds the drag and drop event the view will act upon.

PySide.QtGui.QAbstractItemView.setDragDropOverwriteMode(overwrite)¶

Parameters:	overwrite – `PySide.QtCore.bool`

This property holds the view’s drag and drop behavior.

If its value is true , the selected data will overwrite the existing item data when dropped, while moving the data will clear the item. If its value is false , the selected data will be inserted as a new item when the data is dropped. When the data is moved, the item is removed as well.

The default value is false , as in the PySide.QtGui.QListView and PySide.QtGui.QTreeView subclasses. In the PySide.QtGui.QTableView subclass, on the other hand, the property has been set to true .

Note: This is not intended to prevent overwriting of items. The model’s implementation of flags() should do that by not returning Qt.ItemIsDropEnabled .

PySide.QtGui.QAbstractItemView.setDragEnabled(enable)¶

Parameters:	enable – `PySide.QtCore.bool`

This property holds whether the view supports dragging of its own items.

PySide.QtGui.QAbstractItemView.setDropIndicatorShown(enable)¶

Parameters:	enable – `PySide.QtCore.bool`

This property holds whether the drop indicator is shown when dragging items and dropping..

PySide.QtGui.QAbstractItemView.setEditTriggers(triggers)¶

Parameters:	triggers – `PySide.QtGui.QAbstractItemView.EditTriggers`

This property holds which actions will initiate item editing.

This property is a selection of flags defined by QAbstractItemView.EditTrigger , combined using the OR operator. The view will only initiate the editing of an item if the action performed is set in this property.

PySide.QtGui.QAbstractItemView.setHorizontalScrollMode(mode)¶

Parameters:	mode – `PySide.QtGui.QAbstractItemView.ScrollMode`

This property holds how the view scrolls its contents in the horizontal direction.

This property controls how the view scroll its contents horizontally. Scrolling can be done either per pixel or per item.

PySide.QtGui.QAbstractItemView.setIconSize(size)¶

Parameters:	size – `PySide.QtCore.QSize`

This property holds the size of items’ icons.

Setting this property when the view is visible will cause the items to be laid out again.

PySide.QtGui.QAbstractItemView.setIndexWidget(index, widget)¶

Parameters:	index – `PySide.QtCore.QModelIndex` widget – `PySide.QtGui.QWidget`

Sets the given widget on the item at the given index , passing the ownership of the widget to the viewport.

If index is invalid (e.g., if you pass the root index), this function will do nothing.

The given widget ‘s autoFillBackground property must be set to true, otherwise the widget’s background will be transparent, showing both the model data and the item at the given index .

If index widget A is replaced with index widget B, index widget A will be deleted. For example, in the code snippet below, the PySide.QtGui.QLineEdit object will be deleted.

setIndexWidget(index, QLineEdit())
...
setIndexWidget(index, QTextEdit())

This function should only be used to display static content within the visible area corresponding to an item of data. If you want to display custom dynamic content or implement a custom editor widget, subclass PySide.QtGui.QItemDelegate instead.

PySide.QtGui.QAbstractItemView.setItemDelegate(delegate)¶

Parameters:	delegate – `PySide.QtGui.QAbstractItemDelegate`

Sets the item delegate for this view and its model to delegate . This is useful if you want complete control over the editing and display of items.

Any existing delegate will be removed, but not deleted. PySide.QtGui.QAbstractItemView does not take ownership of delegate .

Warning

You should not share the same instance of a delegate between views. Doing so can cause incorrect or unintuitive editing behavior since each view connected to a given delegate may receive the PySide.QtGui.QAbstractItemDelegate.closeEditor() signal, and attempt to access, modify or close an editor that has already been closed.

PySide.QtGui.QAbstractItemView.setItemDelegateForColumn(column, delegate)¶

Parameters:	column – `PySide.QtCore.int` delegate – `PySide.QtGui.QAbstractItemDelegate`

Sets the given item delegate used by this view and model for the given column . All items on column will be drawn and managed by delegate instead of using the default delegate (i.e., PySide.QtGui.QAbstractItemView.itemDelegate() ).

Any existing column delegate for column will be removed, but not deleted. PySide.QtGui.QAbstractItemView does not take ownership of delegate .

Note

If a delegate has been assigned to both a row and a column, the row delegate will take precedence and manage the intersecting cell index.

Warning

You should not share the same instance of a delegate between views. Doing so can cause incorrect or unintuitive editing behavior since each view connected to a given delegate may receive the PySide.QtGui.QAbstractItemDelegate.closeEditor() signal, and attempt to access, modify or close an editor that has already been closed.

PySide.QtGui.QAbstractItemView.setItemDelegateForRow(row, delegate)¶

Parameters:	row – `PySide.QtCore.int` delegate – `PySide.QtGui.QAbstractItemDelegate`

Sets the given item delegate used by this view and model for the given row . All items on row will be drawn and managed by delegate instead of using the default delegate (i.e., PySide.QtGui.QAbstractItemView.itemDelegate() ).

Any existing row delegate for row will be removed, but not deleted. PySide.QtGui.QAbstractItemView does not take ownership of delegate .

Note

If a delegate has been assigned to both a row and a column, the row delegate (i.e., this delegate) will take precedence and manage the intersecting cell index.

Warning

You should not share the same instance of a delegate between views. Doing so can cause incorrect or unintuitive editing behavior since each view connected to a given delegate may receive the PySide.QtGui.QAbstractItemDelegate.closeEditor() signal, and attempt to access, modify or close an editor that has already been closed.

PySide.QtGui.QAbstractItemView.setModel(model)¶

Parameters:	model – `PySide.QtCore.QAbstractItemModel`

Sets the model for the view to present.

This function will create and set a new selection model, replacing any model that was previously set with PySide.QtGui.QAbstractItemView.setSelectionModel() . However, the old selection model will not be deleted as it may be shared between several views. We recommend that you delete the old selection model if it is no longer required. This is done with the following code:

m = view->selectionModel()
view->setModel(model())
del m

If both the old model and the old selection model do not have parents, or if their parents are long-lived objects, it may be preferable to call their deleteLater() functions to explicitly delete them.

The view does not take ownership of the model unless it is the model’s parent object because the view may be shared between many different views.

PySide.QtGui.QAbstractItemView.setRootIndex(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

Sets the root item to the item at the given index .

PySide.QtGui.QAbstractItemView.setSelection(rect, command)¶

Parameters:	rect – `PySide.QtCore.QRect` command – `PySide.QtGui.QItemSelectionModel.SelectionFlags`

PySide.QtGui.QAbstractItemView.setSelectionBehavior(behavior)¶

Parameters:	behavior – `PySide.QtGui.QAbstractItemView.SelectionBehavior`

This property holds which selection behavior the view uses.

This property holds whether selections are done in terms of single items, rows or columns.

See also

QAbstractItemView.SelectionMode QAbstractItemView.SelectionBehavior

PySide.QtGui.QAbstractItemView.setSelectionMode(mode)¶

Parameters:	mode – `PySide.QtGui.QAbstractItemView.SelectionMode`

This property holds which selection mode the view operates in.

This property controls whether the user can select one or many items and, in many-item selections, whether the selection must be a continuous range of items.

See also

QAbstractItemView.SelectionMode QAbstractItemView.SelectionBehavior

PySide.QtGui.QAbstractItemView.setSelectionModel(selectionModel)¶

Parameters:	selectionModel – `PySide.QtGui.QItemSelectionModel`

Sets the current selection model to the given selectionModel .

Note that, if you call PySide.QtGui.QAbstractItemView.setModel() after this function, the given selectionModel will be replaced by one created by the view.

Note

It is up to the application to delete the old selection model if it is no longer needed; i.e., if it is not being used by other views. This will happen automatically when its parent object is deleted. However, if it does not have a parent, or if the parent is a long-lived object, it may be preferable to call its deleteLater() function to explicitly delete it.

PySide.QtGui.QAbstractItemView.setState(state)¶

Parameters:	state – `PySide.QtGui.QAbstractItemView.State`

Sets the item view’s state to the given state .

PySide.QtGui.QAbstractItemView.setTabKeyNavigation(enable)¶

Parameters:	enable – `PySide.QtCore.bool`

This property holds whether item navigation with tab and backtab is enabled..

PySide.QtGui.QAbstractItemView.setTextElideMode(mode)¶

Parameters:	mode – `PySide.QtCore.Qt.TextElideMode`

This property holds the position of the ”...” in elided text..

The default value for all item views is Qt.ElideRight .

PySide.QtGui.QAbstractItemView.setVerticalScrollMode(mode)¶

Parameters:	mode – `PySide.QtGui.QAbstractItemView.ScrollMode`

This property holds how the view scrolls its contents in the vertical direction.

This property controls how the view scroll its contents vertically. Scrolling can be done either per pixel or per item.

PySide.QtGui.QAbstractItemView.showDropIndicator()¶

Return type:	`PySide.QtCore.bool`

This property holds whether the drop indicator is shown when dragging items and dropping..

PySide.QtGui.QAbstractItemView.sizeHintForColumn(column)¶

Parameters:	column – `PySide.QtCore.int`
Return type:	`PySide.QtCore.int`

Returns the width size hint for the specified column or -1 if there is no model.

This function is used in views with a horizontal header to find the size hint for a header section based on the contents of the given column .

PySide.QtGui.QAbstractItemView.sizeHintForIndex(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`
Return type:	`PySide.QtCore.QSize`

Returns the size hint for the item with the specified index or an invalid size for invalid indexes.

PySide.QtGui.QAbstractItemView.sizeHintForRow(row)¶

Parameters:	row – `PySide.QtCore.int`
Return type:	`PySide.QtCore.int`

Returns the height size hint for the specified row or -1 if there is no model.

The returned height is calculated using the size hints of the given row ‘s items, i.e. the returned value is the maximum height among the items. Note that to control the height of a row, you must reimplement the QAbstractItemDelegate.sizeHint() function.

This function is used in views with a vertical header to find the size hint for a header section based on the contents of the given row .

PySide.QtGui.QAbstractItemView.startAutoScroll()¶

PySide.QtGui.QAbstractItemView.startDrag(supportedActions)¶

Parameters:	supportedActions – `PySide.QtCore.Qt.DropActions`

PySide.QtGui.QAbstractItemView.state()¶

Return type:	`PySide.QtGui.QAbstractItemView.State`

Returns the item view’s state.

PySide.QtGui.QAbstractItemView.stopAutoScroll()¶

PySide.QtGui.QAbstractItemView.tabKeyNavigation()¶

Return type:	`PySide.QtCore.bool`

This property holds whether item navigation with tab and backtab is enabled..

PySide.QtGui.QAbstractItemView.textElideMode()¶

Return type:	`PySide.QtCore.Qt.TextElideMode`

This property holds the position of the ”...” in elided text..

The default value for all item views is Qt.ElideRight .

PySide.QtGui.QAbstractItemView.update(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`

Updates the area occupied by the given index .

PySide.QtGui.QAbstractItemView.updateEditorData()¶: Updates the data shown in the open editor widgets in the view.

PySide.QtGui.QAbstractItemView.updateEditorGeometries()¶: Updates the geometry of the open editor widgets in the view.

PySide.QtGui.QAbstractItemView.updateGeometries()¶: Updates the geometry of the child widgets of the view.

PySide.QtGui.QAbstractItemView.verticalOffset()¶

Return type:	`PySide.QtCore.int`

Returns the vertical offset of the view.

In the base class this is a pure virtual function.

PySide.QtGui.QAbstractItemView.verticalScrollMode()¶

Return type:	`PySide.QtGui.QAbstractItemView.ScrollMode`

This property holds how the view scrolls its contents in the vertical direction.

This property controls how the view scroll its contents vertically. Scrolling can be done either per pixel or per item.

PySide.QtGui.QAbstractItemView.verticalScrollbarAction(action)¶

Parameters:	action – `PySide.QtCore.int`

PySide.QtGui.QAbstractItemView.verticalScrollbarValueChanged(value)¶

Parameters:	value – `PySide.QtCore.int`

PySide.QtGui.QAbstractItemView.viewOptions()¶

Return type:	`PySide.QtGui.QStyleOptionViewItem`

Returns a PySide.QtGui.QStyleOptionViewItem structure populated with the view’s palette, font, state, alignments etc.

PySide.QtGui.QAbstractItemView.viewportEntered()¶

PySide.QtGui.QAbstractItemView.visualRect(index)¶

Parameters:	index – `PySide.QtCore.QModelIndex`
Return type:	`PySide.QtCore.QRect`

Returns the rectangle on the viewport occupied by the item at index .

If your item is displayed in several areas then visualRect should return the primary area that contains index and not the complete area that index might encompasses, touch or cause drawing.

In the base class this is a pure virtual function.

PySide.QtGui.QAbstractItemView.visualRegionForSelection(selection)¶

Parameters:	selection – `PySide.QtGui.QItemSelection`
Return type:	`PySide.QtGui.QRegion`

Returns the region from the viewport of the items in the given selection .

In the base class this is a pure virtual function.

Table Of Contents

Previous topic

Next topic

QAbstractItemView¶

Synopsis¶

Functions¶

Virtual functions¶

Slots¶

Signals¶

Detailed Description¶

Keys	Functionality
Arrow keys	Changes the current item and selects it.
Ctrl+Arrow keys	Changes the current item but does not select it.
Shift+Arrow keys	Changes the current item and selects it. The previously selected item(s) is not deselected.
Ctr+Space	Toggles selection of the current item.
Tab/Backtab	Changes the current item to the next/previous item.
Home/End	Selects the first/last item in the model.
Page up/Page down	Scrolls the rows shown up/down by the number of visible rows in the view.
Ctrl+A	Selects all items in the model.

Table Of Contents

Previous topic

Next topic

Quick search

QAbstractItemView¶

Synopsis¶

Functions¶

Virtual functions¶

Slots¶

Signals¶

Detailed Description¶